How to change ignition leads on Ford Mondeo Mk3 saloon – replacement guide
downloads:
0
Views:
34
0
Users voted – 0
Recommended replacement interval for the part category Ignition Cable Kit : 60000km
Important!
This replacement procedure can be used for:
FORD MONDEO III Saloon (B4Y) 1.8 16V,
FORD MONDEO III Saloon (B4Y) 1.8 16V,
FORD MONDEO III Saloon (B4Y) 2.0 16V
…
View more
The steps may slightly vary depending on the car design.
How to change ignition leads on FORD MONDEO MK3 Saloon [TUTORIAL AUTODOC]
All the parts you need to replace – Ignition Leads for MONDEO III Saloon (B4Y) and other FORD models
Replacement: ignition leads – Ford Mondeo Mk3 saloon. Tip from AUTODOC:
All work should be done with the engine stopped.
Replacement: ignition leads – Ford Mondeo Mk3 saloon. Use the following procedure:
Step 1
Open the bonnet.
Step 2
Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
Step 3
Remove the engine cover.
AUTODOC recommends:
Replacement: ignition leads – Ford Mondeo Mk3 saloon. To avoid damaging the part when removing it, do not use excessive force.
Step 4
Make marks to indicate the order of installation of the spark plug wires.
Step 5
Disconnect the spark plug wires from the ignition coil. Disconnect the spark plug wires from the spark plugs.
Replacement: ignition leads – Ford Mondeo Mk3 saloon. Tip:
Be careful to avoid damaging spark plug wires.Remember the position of the spark plug wires.
Step 6
Connect the spark plug wires to the ignition coil. Connect the new spark plug wires to the spark plugs.
Replacement: ignition leads – Ford Mondeo Mk3 saloon. Tip from AUTODOC experts:
Follow the installation sequence.
Step 7
Run the engine for a few minutes. This is necessary in order to make sure that the component operates properly.
Step 8
Shut off the engine.
Step 9
Install the engine cover and secure it.
AUTODOC recommends:
Make sure the engine cover is properly seated. It should not be displaced with respect to the guiding fasteners.Replacement: ignition leads – Ford Mondeo Mk3 saloon. Do not use excessive force during installation. This may damage the part.
Step 10
Remove the fender protection cover.
Step 11
Close the hood.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?
Find out which tyre and wheel sizes are compatible with the FORD Mondeo Mk3 Saloon (B4Y) model.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your FORD MONDEO III Saloon (B4Y)
View more
How to wash your car in winter | AUTODOC tips
Top 5 reasons why your car squeals | AUTODOC Tips
How to detect vacuum leaks using a smoke machine | AUTODOC