
Disclaimer
How to change glow plugs on RENAULT Vel Satis Hatchback – replacement guide
downloads:
0
Views:
1
Recommended replacement interval for the part category Glow plug : 30000 km
Important!
This replacement procedure can be used for:
RENAULT Vel Satis Hatchback 2.2 dCi (BJ0E, BJ0F, BJ0G, BJ0H), RENAULT Vel Satis Hatchback 2.2 dCi (BJ0E, BJ0F) … View more
The steps may slightly vary depending on the car design.
RENAULT Vel Satis Hatchback 2.2 dCi (BJ0E, BJ0F, BJ0G, BJ0H), RENAULT Vel Satis Hatchback 2.2 dCi (BJ0E, BJ0F) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Glow Plugs for Vel Satis Hatchback and other RENAULT models
Alternative products

WD-40 spray
Electronic spray
Ceramic grease
Torque wrench
7 mm socket
10 mm socket
10 mm glow plug socket
Ratchet wrench
Glow plug pliers
Fender cover
Replacement: glow plugs – RENAULT VEL SATIS (BJ0_). AUTODOC experts recommend:
- The replacement procedure is identical for all glow plugs.
- All the work should be carried out with the ignition switched off.
Replacement: glow plugs – RENAULT VEL SATIS (BJ0_). Use the following procedure:
- Step 1Open the bonnet.Step 2Use a fender protection cover to avoid damaging the paintwork and plastic parts of the car.Step 3
Loosen the clamp that connects the air intake hose to the mass air flow sensor. Use a 7 mm socket. Use a ratchet wrench. - Step 4
Detach the air intake hose from the MAF sensor.Replacement: glow plugs – RENAULT VEL SATIS (BJ0_). Professionals recommend:Protect the MAF sensor and other air intake system components from contaminants getting in. - Step 5
Remove the air filter housing together with the air intake hose. - Step 6
Unscrew the coolant expansion tank fastener. Use a 10 mm socket. Use a ratchet wrench. - Step 7
Remove the fastening bolt. - Step 8
Remove the coolant expansion tank. - Step 9
Detach the glow plug connectors. - Step 10
Clean the glow plug wells. Use WD-40 spray. - Step 11
Unscrew the glow plugs. Use a 10 mm glow plug socket. Use a torque wrench. Use a ratchet wrench.Replacement: glow plugs – RENAULT VEL SATIS (BJ0_). Tip from AUTODOC:Glow plugs can get stuck over time and break apart when removed.Before unscrewing the parts, use a torque wrench to loosen them to avoid exceeding the breakaway torque specified by the car manufacturer.If you have reached the breakaway torque but the glow plugs still will not loosen up, you need to seek professional help: a glow plug fragment left inside the well or damage to the thread of the mounting seat can result in costly engine repairs. - Step 12
Remove the glow plugs. Use glow plug pliers. - Step 13
Treat the new glow plugs. Use ceramic grease. - Step 14
Install the new glow plugs into their mounting seats. Use glow plug pliers. Use a ratchet wrench. - Step 15
Tighten the glow plugs. Use a 10 mm glow plug socket. Use a torque wrench. Tightening torque: 15 N·m.Replacement: glow plugs – RENAULT VEL SATIS (BJ0_). AUTODOC recommends:Don't use excessive force when tightening the glow plugs. Overtightening can damage the threaded connection. - Step 16
Treat the glow plug connectors. Use an electronic spray.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Vel Satis Hatchback model
Popular maintenance tutorials for Renault Vel Satis BJ
Complete guides for changing the Glow plug on different RENAULT VEL SATIS models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT Vel Satis Hatchback
View more
5 mistakes made when washing the engine | AUTODOC tips
Fuse Replacement Made Simple: Step-by-Step Guide | AUTODOC
DIY alternator repair | AUTODOC tips
BMW E30 Turbo Suspension Swap: Boost Your Handling | AUTODOC project
Most commonly replaced car parts on RENAULT VEL SATIS
Time to replace parts? Get even better deals in our Shop app.

SCAN ME




























