How to change fuel filter on FIAT DOBLO Box Body / Estate (263) – replacement guide
downloads:
1
Views:
14
0
Users voted – 0
Recommended replacement interval for the part category Fuel filter : 4year / 70000km
Important!
This replacement procedure can be used for:
FIAT DOBLO Box Body / Estate (263) 1.3 D Multijet,
FIAT DOBLO Box Body / Estate (263) 2.0 D Multijet,
FIAT DOBLO Box Body / Estate (263) 1.6 D Multijet (263ZXE1B, 263ZXS1B, 263ZXY1B, 263WXE1B,...,
FIAT DOBLO Box Body / Estate (263) 1.3 D Multijet,
FIAT DOBLO Box Body / Estate (263) 1.6 D Multijet,
FIAT DOBLO Box Body / Estate (263) 1.6 D Multijet (263WXD1B, 263WXR1B, 263WXX1B, 263ZXD1B,...
…
View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Fuel Filter for DOBLO Box Body / Estate (263) and other FIAT models
Replacement: fuel filter – FIAT DOBLO Box Body / Estate (263). Professionals recommend:
Ensure adequate ventilation of the workplace. Fuel vapors are poisonous.
All work should be done with the engine stopped.
Replacement: fuel filter – FIAT DOBLO Box Body / Estate (263). Recommended sequence of steps:
Step 1
Open the bonnet.
Step 2
Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
Step 3
Clean the fasteners of the fuel supply lines. Use all-purpose cleaning spray.
Step 4
Squeeze the clips and detach the fuel supply lines from the fuel filter housing. Use fuel line pliers.
Replacement: fuel filter – FIAT DOBLO Box Body / Estate (263). Tip from AUTODOC:
Be careful! Fuel may leak from the filter housing and hoses.
Step 5
Loosen the fuel filter mounting. Use a drive socket #10. Use a ratchet wrench.
Step 6
Remove the fuel filter.
Step 7
Detach the fuel pressure sensor connector.
Step 8
Attach the fuel pressure sensor connector.
Step 9
Install a new fuel filter.
Step 10
Tighten the fuel filter fasteners. Use a drive socket #10. Use a ratchet wrench.
Replacement: fuel filter – FIAT DOBLO Box Body / Estate (263). Professionals recommend:
Make sure that the fuel filter is positioned correctly. Consider the fuel flow direction mark.During installation, take care to prevent dust and dirt from getting into the fuel filter housing.Attention! Use quality filters – FIAT DOBLO Box Body / Estate (263).
Step 11
Connect the fuel lines to the fuel filter and lock the fastening clips.
Step 12
Connect the bleeder kit to the fuel filter bleeder screw.
Step 13
Unscrew the fuel filter bleeder screw. Use a combination spanner #12.
Step 14
Switch on the ignition. This should be done to activate the fuel pump to make it pump fuel through the fuel system.
Step 15
Remove the bleeder kit.
Step 16
Screw in the fuel filter bleeder screw. Use a drive socket #12. Use a ratchet wrench.
Step 17
Run the engine for a few minutes. This is necessary in order to make sure that the component operates properly.
Step 18
Shut off the engine.
Step 19
Remove the fender protection cover.
Step 20
Close the hood.
Replacement: fuel filter – FIAT DOBLO Box Body / Estate (263). Tip:
To protect the environment from pollution, be sure to dispose of the used filters at special collection points.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Popular maintenance tutorials for FIAT DOBLO Box Body / Estate (263)
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your FIAT DOBLO Box Body / Estate (263)