Be careful! Fuel may leak from the filter housing and hoses.
Step 7
Put the old filter cartridge in the container.
Step 8
Pump the fuel out of the fuel filter housing. Use a hand-operated fluid syringe.
Step 9
Install a new fuel filter.
AUTODOC recommends:
Make sure that the fuel filter is positioned correctly. Consider the fuel flow direction mark.During installation, take care to prevent dust and dirt from getting into the fuel filter housing.CITROËN JUMPY (U6U) – It's important to only use high-quality car parts.
Step 10
Install and tighten the cap of the fuel filter housing.
Step 11
Tighten the fasteners of the fuel filter housing cover. Use HEX No.H4. Use a torque wrench. Tighten it to 9 Nm torque.
Step 12
Clean the fuel filter housing and the cover. Use all-purpose cleaning spray.
Step 13
Prime the fuel system manually.
Step 14
Run the engine for a few minutes. This is necessary in order to make sure that the component operates properly.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your CITROËN JUMPY (U6U)
View more
TOP 6 WD-40 lifehacks | AUTODOC tips
How to check your head gasket | AUTODOC
How to clean an engine bay | AUTODOC
Important differences between car tools | AUTODOC tips
Most commonly replaced car parts on CITROËN DISPATCH