How to change front windshield wipers on TOYOTA Celica VI Coupe (T200) – replacement guide
downloads:
0
Views:
58
0
Users voted – 0
Recommended replacement interval for the part category Wiper blade : 12month
Important!
This replacement procedure can be used for:
TOYOTA CELICA (ST20_, AT20_) 1.8 i 16V (AT200/ST),
TOYOTA CELICA (ST20_, AT20_) 2.0 i 16V (ST202/GT),
TOYOTA CELICA (ST20_, AT20_) 2.0 i Turbo 4WD (ST205),
TOYOTA CELICA (ST20_, AT20_) 2.0 i 16V (ST202_)
…
View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Wiper Blades for CELICA (ST20_, AT20_) and other TOYOTA models
Rear wiper blade for TOYOTA CELICA (ST20_, AT20_) 1.8 i 16V (AT200/ST) Petrol (116 hp)
Rear wiper blade for TOYOTA CELICA (ST20_, AT20_) 2.0 i 16V (ST202/GT) Petrol (175 hp)
Rear wiper blade for TOYOTA CELICA (ST20_, AT20_) 2.0 i Turbo 4WD (ST205) Petrol (242 hp)
Rear wiper blade for TOYOTA CELICA (ST20_, AT20_) 2.0 i 16V (ST202_) Petrol (170 hp)
Replacement: windshield wipers – TOYOTA CELICA (ST20_, AT20_). Tip from AUTODOC experts:
Always replace front wiper blades together. It will ensure efficient and uniform cleaning of the windshield.
Don't confuse the wiper blades of the driver and passenger side.
The replacement procedure for both wiper blades is identical.
All work should be done with the engine stopped.
Replacement: windshield wipers – TOYOTA CELICA (ST20_, AT20_). Use the following procedure:
Step 1
Prepare the new windscreen wipers.
Step 2
Pull the wiper arm away from the glass surface until it stops.
Step 3
Turn the wiper blade by ninety degrees. Remove the blade from the wiper arm.
Replacement: windshield wipers – TOYOTA CELICA (ST20_, AT20_). Tip:
When replacing the wiper blade, take caution to prevent the spring-loaded wiper arm from hitting the glass.
Step 4
Install the new wiper blade and carefully press the wiper arm down to the glass.
Replacement: windshield wipers – TOYOTA CELICA (ST20_, AT20_). Professionals recommend:
Don't touch the wiper blade at the working rubber edge to prevent damage to the graphite coating. Ensure that the blade rubber strip fits tightly to the glass along the entire length.
Step 5
Switch on the ignition.
Step 6
After installation check the wipers performance. The blades shouldn't intersect or bump against the windshield seal.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Popular maintenance tutorials for Toyota Celica T20
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your TOYOTA CELICA (ST20_, AT20_)
View more
What to do if the TPMS light is on | AUTODOC tips
4 reasons why your CHECK ENGINE light is on | AUTODOC tips