How to change front windshield wipers on RENAULT CLIO II Box (SB0/1/2_) – replacement guide
downloads:
2
Views:
14
0
Users voted – 0
Recommended replacement interval for the part category Wiper blade : 12month
Important!
This replacement procedure can be used for:
RENAULT CLIO II Box (SB0/1/2_) 1.9 D (SB0E),
RENAULT CLIO II Box (SB0/1/2_) 1.2 (SB0A, SB0F, SB1K, SB2D),
RENAULT CLIO II Box (SB0/1/2_) 1.5 dCi (SB07),
RENAULT CLIO II Box (SB0/1/2_) 1.6 (SB0H),
RENAULT CLIO II Box (SB0/1/2_) 1.5 dCi,
RENAULT CLIO II Box (SB0/1/2_) 1.5 dCi,
RENAULT CLIO II Box (SB0/1/2_) 1.9 DTi (SB0U),
RENAULT CLIO II Box (SB0/1/2_) 1.5 dCi,
RENAULT CLIO II Box (SB0/1/2_) 1.9 D (SB0R),
RENAULT CLIO II Box (SB0/1/2_) 1.9 D (SB0J),
RENAULT CLIO II Box (SB0/1/2_) 1.2 (SB0A, SB0F, SB10)
…
View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Wiper Blades for CLIO II Box (SB0/1/2_) and other RENAULT models
Wiper blade for RENAULT CLIO II Box (SB0/1/2_) 1.9 DTi (SB0U) Diesel (80 hp)
Wiper blade for RENAULT CLIO II Box (SB0/1/2_) 1.5 dCi Diesel (80 hp)
Wiper blade for RENAULT CLIO II Box (SB0/1/2_) 1.9 D (SB0R) Diesel (54 hp)
Rear wiper blade for RENAULT CLIO II Box (SB0/1/2_) 1.9 D (SB0E) Diesel (64 hp)
Rear wiper blade for RENAULT CLIO II Box (SB0/1/2_) 1.2 (SB0A, SB0F, SB1K, SB2D) Petrol (58 hp)
Rear wiper blade for RENAULT CLIO II Box (SB0/1/2_) 1.5 dCi (SB07) Diesel (65 hp)
Rear wiper blade for RENAULT CLIO II Box (SB0/1/2_) 1.6 (SB0H) Petrol (107 hp)
Rear wiper blade for RENAULT CLIO II Box (SB0/1/2_) 1.5 dCi Diesel (68 hp)
Rear wiper blade for RENAULT CLIO II Box (SB0/1/2_) 1.5 dCi Diesel (82 hp)
Rear wiper blade for RENAULT CLIO II Box (SB0/1/2_) 1.9 DTi (SB0U) Diesel (80 hp)
Rear wiper blade for RENAULT CLIO II Box (SB0/1/2_) 1.5 dCi Diesel (80 hp)
Rear wiper blade for RENAULT CLIO II Box (SB0/1/2_) 1.9 D (SB0R) Diesel (54 hp)
Replacement: windshield wipers – RENAULT CLIO II Box (SB0/1/2_). Tip from AUTODOC experts:
Always replace front wiper blades together. It will ensure efficient and uniform cleaning of the windshield.
Don't confuse the wiper blades of the driver and passenger side.
The replacement procedure for both wiper blades is identical.
All work should be done with the engine stopped.
Replacement: windshield wipers – RENAULT CLIO II Box (SB0/1/2_). Take the following steps:
Step 1
Prepare the new windscreen wipers.
Step 2
Pull the wiper arm away from the glass surface until it stops.
Step 3
Turn the wiper blade by ninety degrees. Remove the blade from the wiper arm.
Replacement: windshield wipers – RENAULT CLIO II Box (SB0/1/2_). AUTODOC recommends:
When replacing the wiper blade, take caution to prevent the spring-loaded wiper arm from hitting the glass.
Step 4
Install the new wiper blade and carefully press the wiper arm down to the glass.
Replacement: windshield wipers – RENAULT CLIO II Box (SB0/1/2_). AUTODOC experts recommend:
Don't touch the wiper blade at the working rubber edge to prevent damage to the graphite coating. Ensure that the blade rubber strip fits tightly to the glass along the entire length.
Step 5
Switch on the ignition.
Step 6
After installation check the wipers performance. The blades shouldn't intersect or bump against the windshield seal.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Popular maintenance tutorials for Renault Clio 2 Van
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your RENAULT CLIO II Box (SB0/1/2_)
View more
What to do if the ABS light comes on | AUTODOC tips
How to check your head gasket | AUTODOC
How to detect vacuum leaks using a smoke machine | AUTODOC