Don't touch the wiper blade at the working rubber edge to prevent damage to the graphite coating. Ensure that the blade rubber strip fits tightly to the glass along the entire length.
Step 6
Switch on the ignition.
Step 7
After installation check the wipers performance. The blades shouldn't intersect or bump against the windshield seal.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.