How to change rear windshield wipers on NISSAN MICRA III (K12) – replacement guide
downloads:
1
Views:
12
0
Users voted – 0
Recommended replacement interval for the part category Wiper blade : 12month
Important!
This replacement procedure can be used for:
NISSAN MICRA III (K12) 1.0 16V,
NISSAN MICRA III (K12) 1.5 dCi,
NISSAN MICRA III (K12) 1.5 dCi,
NISSAN MICRA III (K12) 1.2 16V,
NISSAN MICRA III (K12) 1.4 16V,
NISSAN MICRA III (K12) 1.2 16V
…
View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Wiper Blades for MICRA III (K12) and other NISSAN models
Rear wiper blade for NISSAN MICRA III (K12) 1.2 16V Petrol (80 hp)
Rear wiper blade for NISSAN MICRA III (K12) 1.4 16V Petrol (88 hp)
Rear wiper blade for NISSAN MICRA III (K12) 1.2 16V Petrol (65 hp)
Rear wiper blade for NISSAN MICRA III (K12) 1.5 dCi Diesel (65 hp)
Rear wiper blade for NISSAN MICRA III (K12) 1.5 dCi Diesel (82 hp)
Rear wiper blade for NISSAN MICRA III (K12) 1.0 16V Petrol (65 hp)
Wiper Arm Set, window cleaning for NISSAN MICRA III (K12) 1.2 16V Petrol (80 hp)
Wiper Arm Set, window cleaning for NISSAN MICRA III (K12) 1.4 16V Petrol (88 hp)
Wiper Arm Set, window cleaning for NISSAN MICRA III (K12) 1.2 16V Petrol (65 hp)
Wiper Arm Set, window cleaning for NISSAN MICRA III (K12) 1.5 dCi Diesel (65 hp)
Wiper Arm Set, window cleaning for NISSAN MICRA III (K12) 1.5 dCi Diesel (82 hp)
Wiper Arm Set, window cleaning for NISSAN MICRA III (K12) 1.0 16V Petrol (65 hp)
AUTODOC recommends:
Please note: all work on the car – NISSAN MICRA III (K12) – should be done with the engine switched off.
Carry out replacement in the following order:
Step 1
Prepare the new windscreen wipers.
Step 2
Pull the wiper arm away from the glass surface until it stops.
Step 3
Press the clip. Remove the blade from the wiper arm.
Replacement: windshield wipers – NISSAN MICRA III (K12). Tip from AUTODOC experts:
When replacing the wiper blade, take caution to prevent the spring-loaded wiper arm from hitting the glass.
Step 4
Install the new wiper blade and carefully press the wiper arm down to the glass.
Replacement: windshield wipers – NISSAN MICRA III (K12). Tip from AUTODOC:
Don't touch the wiper blade at the working rubber edge to prevent damage to the graphite coating. Ensure that the blade rubber strip fits tightly to the glass along the entire length.
Step 5
Switch on the ignition.
Step 6
After installation check the wipers performance.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Popular maintenance tutorials for Nissan Micra Mk3
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your NISSAN MICRA III (K12)
View more
How to clean an engine bay | AUTODOC
Causes of a worn car boot damper | AUTODOC
How to easily repair a punctured tyre | AUTODOC tips