How to change front windshield wipers on KIA Carens II (FJ) – replacement guide
downloads:
7
Views:
63
0
Users voted – 0
Recommended replacement interval for the part category Wiper blade : 12month
Important!
This replacement procedure can be used for:
KIA CARENS II (FJ) 1.6,
KIA CARENS II (FJ) 1.8,
KIA CARENS II (FJ) 2.0 CRDi,
KIA CARENS II (FJ) 2.0 CVVT,
KIA CARENS II (FJ) 2.0 CRDi
…
View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Wiper Blades for CARENS II (FJ) and other KIA models
Rear wiper blade for KIA CARENS II (FJ) 1.6 Petrol (105 hp)
Rear wiper blade for KIA CARENS II (FJ) 1.8 Petrol (126 hp)
Rear wiper blade for KIA CARENS II (FJ) 2.0 CRDi Diesel (113 hp)
Rear wiper blade for KIA CARENS II (FJ) 2.0 CVVT Petrol (139 hp)
Rear wiper blade for KIA CARENS II (FJ) 2.0 CRDi Diesel (140 hp)
Wiper Arm Set, window cleaning for KIA CARENS II (FJ) 2.0 CRDi Diesel (140 hp)
Replacement: windshield wipers – KIA CARENS II (FJ). Tip from AUTODOC experts:
Always replace front wiper blades together. It will ensure efficient and uniform cleaning of the windshield.
Don't confuse the wiper blades of the driver and passenger side.
The replacement procedure for both wiper blades is identical.
Please note: all work on the car – KIA CARENS II (FJ) – should be done with the engine switched off.
Carry out replacement in the following order:
Step 1
Prepare the new windscreen wipers.
Step 2
Pull the wiper arm away from the glass surface until it stops.
Step 3
Press the clip.
Step 4
Remove the blade from the wiper arm.
Replacement: windshield wipers – KIA CARENS II (FJ). Professionals recommend:
When replacing the wiper blade, take caution to prevent the spring-loaded wiper arm from hitting the glass.
Step 5
Install the new wiper blade and carefully press the wiper arm down to the glass.
Replacement: windshield wipers – KIA CARENS II (FJ). AUTODOC experts recommend:
Don't touch the wiper blade at the working rubber edge to prevent damage to the graphite coating. Ensure that the blade rubber strip fits tightly to the glass along the entire length.
Step 6
Switch on the ignition.
Step 7
After installation check the wipers performance. The blades shouldn't intersect or bump against the windshield seal.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your KIA CARENS II (FJ)
View more
4 reasons why your CHECK ENGINE light is on | AUTODOC tips
How to reduce fuel consumption | AUTODOC
What to do if your car heater isn't working | AUTODOC tips
Top 6 products for enhancing your car | AUTODOC tips