How to change front windshield wipers on HONDA Accord VII Saloon (CL, CN) – replacement guide
downloads:
0
Views:
41
0
Users voted – 0
Recommended replacement interval for the part category Wiper blade : 12month
Important!
This replacement procedure can be used for:
HONDA Accord VII Saloon (CL, CN) 2.0 (CL7),
HONDA Accord VII Saloon (CL, CN) 2.4 (CL9),
HONDA Accord VII Saloon (CL, CN) 2.2 i-CTDi (CN1),
HONDA Accord VII Saloon (CL, CN) 2.0 Allrad (CL8)
…
View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Wiper Blades for Accord VII Saloon (CL, CN) and other HONDA models
Rear wiper blade for HONDA Accord VII Saloon (CL, CN) 2.0 (CL7) Petrol (155 hp)
Rear wiper blade for HONDA Accord VII Saloon (CL, CN) 2.4 (CL9) Petrol (190 hp)
Rear wiper blade for HONDA Accord VII Saloon (CL, CN) 2.2 i-CTDi (CN1) Diesel (140 hp)
Rear wiper blade for HONDA Accord VII Saloon (CL, CN) 2.0 Allrad (CL8) Petrol (155 hp)
Replacement: windshield wipers – HONDA ACCORD VII (CL). Tip:
Always replace front wiper blades together. It will ensure efficient and uniform cleaning of the windshield.
Don't confuse the wiper blades of the driver and passenger side.
The replacement procedure for both wiper blades is identical.
Please note: all work on the car – HONDA ACCORD VII (CL) – should be done with the engine switched off.
Carry out replacement in the following order:
Step 1
Prepare the new windscreen wipers.
Step 2
Pull the wiper arm away from the glass surface until it stops.
Step 3
Press the clip.
Step 4
Remove the blade from the wiper arm.
Replacement: windshield wipers – HONDA ACCORD VII (CL). Professionals recommend:
When replacing the wiper blade, take caution to prevent the spring-loaded wiper arm from hitting the glass.
Step 5
Install the new wiper blade and carefully press the wiper arm down to the glass.
Replacement: windshield wipers – HONDA ACCORD VII (CL). AUTODOC recommends:
Don't touch the wiper blade at the working rubber edge to prevent damage to the graphite coating. Ensure that the blade rubber strip fits tightly to the glass along the entire length.
Step 6
Switch on the ignition.
Step 7
After installation check the wipers performance. The blades shouldn't intersect or bump against the windshield seal.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Popular maintenance tutorials for Honda Accord CL7
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your HONDA Accord VII Saloon (CL, CN)
View more
Why do your brakes squeak? | AUTODOC tips
How to polish an old engine valve cover to a shiny finish | AUTODOC Tips