How to change front windshield wipers on FORD RANGER (TKE) – replacement guide
downloads:
0
Views:
122
0
Users voted – 0
Recommended replacement interval for the part category Wiper blade : 12month
Important!
This replacement procedure can be used for:
FORD RANGER (TKE) 3.2 TDCi,
FORD RANGER (TKE) 2.2 TDCi,
FORD RANGER (TKE) 3.2 TDCi 4x4,
FORD RANGER (TKE) 2.2 TDCi 4x4,
FORD RANGER (TKE) 2.2 TDCi 4x4,
FORD RANGER (TKE) 2.2 TDCi
…
View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Wiper Blades for RANGER (TKE) and other FORD models
Rear wiper blade for FORD RANGER (TKE) 2.2 TDCi Diesel (125 hp)
Rear wiper blade for FORD RANGER (TKE) 2.2 TDCi 4x4 Diesel (125 hp)
Rear wiper blade for FORD RANGER (TKE) 2.2 TDCi 4x4 Diesel (150 hp)
Rear wiper blade for FORD RANGER (TKE) 3.2 TDCi 4x4 Diesel (200 hp)
Rear wiper blade for FORD RANGER (TKE) 2.2 TDCi Diesel (150 hp)
Rear wiper blade for FORD RANGER (TKE) 3.2 TDCi Diesel (200 hp)
Replacement: windshield wipers – FORD RANGER (TKE). Tip from AUTODOC:
Always replace front wiper blades together. It will ensure efficient and uniform cleaning of the windshield.
Don't confuse the wiper blades of the driver and passenger side.
The replacement procedure for both wiper blades is identical.
Warning! Shut down the engine before starting any work – FORD RANGER (TKE).
Carry out replacement in the following order:
Step 1
Prepare the new windscreen wipers.
Step 2
Pull the wiper arm away from the glass surface until it stops.
Step 3
Press the clip. Remove the blade from the wiper arm.
Replacement: windshield wipers – FORD RANGER (TKE). Tip from AUTODOC experts:
When replacing the wiper blade, take caution to prevent the spring-loaded wiper arm from hitting the glass.
Step 4
Install the new wiper blade and carefully press the wiper arm down to the glass.
Replacement: windshield wipers – FORD RANGER (TKE). AUTODOC recommends:
Don't touch the wiper blade at the working rubber edge to prevent damage to the graphite coating. Ensure that the blade rubber strip fits tightly to the glass along the entire length.
Step 5
Switch on the ignition.
Step 6
After installation check the wipers performance. The blades shouldn't intersect or bump against the windshield seal.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your FORD RANGER (TKE)
View more
How to clean an engine bay | AUTODOC
Things you should never do with an automatic transmission | AUTODOC tips