Important!
This replacement procedure can be used for:
VW Golf VI Convertible (517) 1.2 TSI, VW Golf VI Convertible (517) 1.4 TSI, VW Golf VI Convertible (517) 1.4 TSI, VW Golf VI Convertible (517) 2.0 GTI, VW Golf VI Convertible (517) 1.6 TDI, VW Golf VI Convertible (517) 2.0 TDI, VW Golf VI Convertible (517) 1.2 TSI 16V, VW Golf VI Convertible (517) 2.0 R, VW Golf VI Convertible (517) 1.4 TSI, VW Golf VI Convertible (517) 1.4 TSI, VW Golf VI Convertible (517) 2.0 TDI View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Wheel Bearing for Golf VI Convertible (517) and other VW models
How to change Wheel bearing kit on VW Golf 6 Convertible 1.6 TDI – step-by-step instructions for straightforward car repair
Wheel bearing kit
How to change Wheel bearing on VW Golf 6 Convertible 1.6 TDI – step-by-step instructions for straightforward car repair
Wheel bearing
Tools
Replacement: wheel bearing – VW GOLF VI Convertible (517). List of the tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #18
Drive socket # 16
Drive socket # 18
Drive socket # 21
Drive socket # 27
XZN socket bit # 6
XZN socket bit # 12
HEX bit No.H5
HEX bit No.H7
Torx bit T27
Torx bit T30
Wheel impact socket #17
Ratchet wrench
Tap wrench
Rubber mallet
Impact screwdriver
Crow bar
Wheel chock
AUTODOC recommends:
  • Do not re-use the bearing assembly of your VW GOLF VI Convertible (517) car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • Please note: all work on the car – VW GOLF VI Convertible (517) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the hood.
    Step 2
    How to change Wheel Bearing on VW Golf 6 Convertible 2011 - free PDF and video manuals
    Clean the brake fluid reservoir cap. Use a brake cleaner.
    AUTODOC recommends:
    Replacement: wheel bearing – VW GOLF VI Convertible (517). After applying the spray, wait a few minutes.
  2. Step 3
    How to replace VW Golf VI Convertible (517) 1.6 TDI 2012 Wheel Bearing - step-by-step manuals and video guides
    Unscrew the engine solenoid valve bracket. Use Torx T27. Use a ratchet wrench.
  3. Step 4
    VW Golf 6 Convertible 2.0 TDI 2013 Wheel Bearing replacement: free workshop manuals
    Unscrew the brake fluid reservoir cap.
  4. Step 5
    Secure the wheels with chocks.
    Step 6
    Changing Wheel Bearing on VW Golf VI Convertible (517) 1.4 TSI 2014 by yourself
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  5. Step 7
    Raise the front of the car and secure on supports.
    Step 8
    How to remove VW GOLF 2.0 GTI 2015 Wheel Bearing - online easy-to-follow instructions
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. VW GOLF VI Convertible (517)
  6. Step 9
    How to replace Wheel Bearing on VW Golf VI Convertible (517) 2016: download PDF manuals and video instructions
    Remove the wheel.
  7. Step 10
    How hard is it to do yourself: Wheel Bearing replacement on VW Golf 6 Convertible 2.0 R 2011 - download illustrated guide
    Spread the brake pads. Use a crowbar.
  8. Step 11
    Need to know how to renew Wheel Bearing on VW GOLF 2012? This free workshop manual will help you to do it yourself
    Remove the dust boot caps of the brake caliper guide pins. Use a crowbar.
  9. Step 12
    Changing of Wheel Bearing on VW Golf 6 Convertible 2013 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the brake caliper fastening. Use HEX No.H7. Use a ratchet wrench.
  10. Step 13
    VW GOLF 2.0 TDI Wheel Bearing replacement: online guides and video tutorials
    Detach the brake caliper retaining spring. Use a crowbar.
  11. Step 14
    Replacing Wheel Bearing on VW Golf 6 Convertible 2015 1.6 TDI by yourself
    Remove the brake caliper.
    Replacement: wheel bearing – VW GOLF VI Convertible (517). Professionals recommend:
    Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur. Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary.
  12. Step 15
    Golf VI Convertible (517) 2.0 GTI 2016 Wheel Bearing DIY replacement workshop manual
    Remove the brake pads.
  13. Step 16
    How to change Wheel Bearing on VW Golf VI Convertible (517) 2011 - tips and tricks
    Loosen the fastener of the driveshaft. Use a drive socket #27. Use a tap wrench.
  14. Step 17
    Step-by-step recommendations for DIY replacement VW Golf 6 Convertible 2012 2.0 GTI Wheel Bearing
    Clean the brake caliper bracket fasteners. Use a wire brush. Use WD-40 spray.
  15. Step 18
    DIY replacement of Wheel Bearing on VW Golf VI Convertible (517) 1.2 TSI 2013 is not an issue anymore with our step-by-step tutorial
    Unscrew the caliper bracket fastening. Use a drive socket #21. Use a ratchet wrench. Use a tap wrench.
  16. Step 19
    How to change Wheel Bearing on VW Golf 6 Convertible 2011 - free PDF and video manuals
    Remove the caliper bracket.
  17. Step 20
    How to replace VW Golf VI Convertible (517) 1.6 TDI 2012 Wheel Bearing - step-by-step manuals and video guides
    Clean the brake disc fastener. Use a wire brush. Use WD-40 spray.
  18. Step 21
    VW Golf 6 Convertible 2.0 TDI 2013 Wheel Bearing replacement: free workshop manuals
    Unscrew the brake disc fastening. Use Torx T30. Use an impact screwdriver.
  19. Step 22
    Changing Wheel Bearing on VW Golf VI Convertible (517) 1.4 TSI 2014 by yourself
    Remove the brake disc. Use a rubber mallet.
  20. Step 23
    How to remove VW GOLF 2.0 GTI 2015 Wheel Bearing - online easy-to-follow instructions
    Clean the fasteners of the brake disc cover. Use a wire brush. Use WD-40 spray.
  21. Step 24
    How to replace Wheel Bearing on VW Golf VI Convertible (517) 2016: download PDF manuals and video instructions
    Unscrew the fasteners of the brake disc cover. Use Torx T27. Use a ratchet wrench.
  22. Step 25
    How hard is it to do yourself: Wheel Bearing replacement on VW Golf 6 Convertible 2.0 R 2011 - download illustrated guide
    Remove the brake disc cover.
  23. Step 26
    Need to know how to renew Wheel Bearing on VW GOLF 2012? This free workshop manual will help you to do it yourself
    Remove the fastening bolt.
  24. Step 27
    Changing of Wheel Bearing on VW Golf 6 Convertible 2013 won't be an issue if you follow this illustrated step-by-step guide
    Clean the fasteners of the wheel hub bearing. Use a wire brush. Use WD-40 spray.
  25. Step 28
    VW GOLF 2.0 TDI Wheel Bearing replacement: online guides and video tutorials
    Clean the fasteners connecting the ball joint to the suspension control arm. Use a wire brush. Use WD-40 spray.
  26. Step 29
    Replacing Wheel Bearing on VW Golf 6 Convertible 2015 1.6 TDI by yourself
    Unscrew the fastener connecting the ball joint to the suspension control arm. Use a drive socket #16. Use a ratchet wrench.
  27. Step 30
    Golf VI Convertible (517) 2.0 GTI 2016 Wheel Bearing DIY replacement workshop manual
    Disconnect the ball joint from the arm.
  28. Step 31
    How to change Wheel Bearing on VW Golf VI Convertible (517) 2011 - tips and tricks
    Detach the driveshaft from the steering knuckle.
  29. Step 32
    Step-by-step recommendations for DIY replacement VW Golf 6 Convertible 2012 2.0 GTI Wheel Bearing
    Clean all joints of the stabiliser link. Use a wire brush. Use WD-40 spray.
  30. Step 33
    DIY replacement of Wheel Bearing on VW Golf VI Convertible (517) 1.2 TSI 2013 is not an issue anymore with our step-by-step tutorial
    Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #18. Use a ratchet wrench.
  31. Step 34
    How to change Wheel Bearing on VW Golf 6 Convertible 2011 - free PDF and video manuals
    Remove the stabilizer rod.
  32. Step 35
    How to replace VW Golf VI Convertible (517) 1.6 TDI 2012 Wheel Bearing - step-by-step manuals and video guides
    Clean the fasteners of the wheel hub bearing. Use a wire brush. Use WD-40 spray.
  33. Step 36
    VW Golf 6 Convertible 2.0 TDI 2013 Wheel Bearing replacement: free workshop manuals
    Unscrew the hub bearing mounting. Use XZN #12. Use a ratchet wrench.
  34. Step 37
    Changing Wheel Bearing on VW Golf VI Convertible (517) 1.4 TSI 2014 by yourself
    Remove the hub and the bearing together, since they are a sealed unit.
  35. Step 38
    How to remove VW GOLF 2.0 GTI 2015 Wheel Bearing - online easy-to-follow instructions
    Unscrew the ABS sensor fastener. Use HEX No.H5. Use a ratchet wrench.
  36. Step 39
    How to replace Wheel Bearing on VW Golf VI Convertible (517) 2016: download PDF manuals and video instructions
    Disconnect the ABS sensor.
  37. Step 40
    How hard is it to do yourself: Wheel Bearing replacement on VW Golf 6 Convertible 2.0 R 2011 - download illustrated guide
    Clean the hub bearing mounting seat. Use a wire brush. Use WD-40 spray.
  38. Step 41
    Need to know how to renew Wheel Bearing on VW GOLF 2012? This free workshop manual will help you to do it yourself
    Connect the ABS sensor.
  39. Step 42
    Changing of Wheel Bearing on VW Golf 6 Convertible 2013 won't be an issue if you follow this illustrated step-by-step guide
    Tighten the fastener that connects the ABS sensor to the steering knuckle. Use HEX No.H5. Use a torque wrench. Tighten it to 7 Nm torque.
  40. Step 43
    VW GOLF 2.0 TDI Wheel Bearing replacement: online guides and video tutorials
    Install the new wheel hub with a bearing.
  41. Step 44
    Replacing Wheel Bearing on VW Golf 6 Convertible 2015 1.6 TDI by yourself
    Tighten the fastener of the wheel hub bearing. Use XZN #12. Use a torque wrench. Tighten it to 74 Nm torque. Tighten it to 70 Nm torque.+90°
    AUTODOC recommends:
    Important! Be sure to use new fasteners.
  42. Step 45
    Treat the fasteners of the wheel hub bearing. Use copper grease.
    Step 46
    Golf VI Convertible (517) 2.0 GTI 2016 Wheel Bearing DIY replacement workshop manual
    Install the brake disc cover.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
VW Golf VI Convertible (517) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY VW Golf VI Convertible (517) Wheel Bearing replacement - online guide
Tips & tricks for your VW Golf VI Convertible (517)
View more
  • How to change Wheel bearings on VW Golf VI Convertible (517) 1.2 TSI - replacement tricks
    TOP 5 mistakes during DIY oil change | AUTODOC tips
  • Changing Hub bearing VW Golf 6 Convertible 1.6 TDI - Replacement Tips
    DIY alternator repair | AUTODOC tips
  • Maintenance Hacks - VW Golf VI Convertible (517) 2.0 TDI Wheel bearing kit replacement guide
    How to save when buying car parts
  • Replace Wheel hub bearing on VW Golf 6 Convertible - free video tips
    How to shine your tyres | AUTODOC tips