Important!
This replacement procedure can be used for:
BMW Z3 Roadster (E36) 1.9 i, BMW Z3 Roadster (E36) 1.8 i, BMW Z3 Roadster (E36) 2.8 i, BMW Z3 Roadster (E36) M 3.2, BMW Z3 Roadster (E36) 1.9 i, BMW Z3 Roadster (E36) 2.0 i, BMW Z3 Roadster (E36) 1.9 i, BMW Z3 Roadster (E36) 3.0 i, BMW Z3 Roadster (E36) 2.2 i, BMW Z3 Roadster (E36) M 3.2, BMW Z3 Roadster (E36) M 3.2, BMW Z3 Roadster (E36) 2.5 i, BMW Z3 Roadster (E36) 3.2 i, BMW Z3 Roadster (E36) 2.8 i, BMW Z3 Roadster (E36) 2.5, BMW Z3 Roadster (E36) 3.0 i, BMW Z3 Roadster (E36) 2.2 i View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Wheel Bearing for Z3 Roadster (E36) and other BMW models
How to change Wheel bearing kit on BMW Z3 Roadster 1.8 i – step-by-step instructions for straightforward car repair
Wheel bearing kit
How to change Wheel bearing on BMW Z3 Roadster 1.8 i – step-by-step instructions for straightforward car repair
Wheel bearing
How to change Cap, wheel bearing on BMW Z3 Roadster 1.8 i – step-by-step instructions for straightforward car repair
Cap, wheel bearing
Tools
Replacement: wheel bearing – BMW Z3 (E36). Tools you need:
Wire brush
WD-40 spray
All-purpose cleaning spray
Brake cleaner
Copper grease
Torque wrench
Drive socket # 16
Drive socket # 46
HEX bit No.H6
Wheel impact socket #17
Tap wrench
Hammer
Impact screwdriver
Universal puller
3-Arm Gear Puller
Flat chisel
Crow bar
Wheel chock
AUTODOC recommends:
  • Do not re-use the bearing assembly of your BMW Z3 (E36) car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • All work should be done with the engine stopped.
Replacement: wheel bearing – BMW Z3 (E36). Take the following steps:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Wheel Bearing on BMW Z3 Roadster 1995 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  2. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    How to replace BMW Z3 Roadster (E36) 1.8 i 1996 Wheel Bearing - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. BMW Z3 (E36)
  3. Step 5
    BMW Z3 Roadster 1.9 i 1997 Wheel Bearing replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Wheel Bearing on BMW Z3 Roadster (E36) 2.0 i 1998 by yourself
    Spread the brake pads. Use a crowbar.
  5. Step 7
    How to remove BMW Z3 3.0 i 1999 Wheel Bearing - online easy-to-follow instructions
    Clean the brake caliper bracket fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 8
    How to replace Wheel Bearing on BMW Z3 Roadster (E36) 2000: download PDF manuals and video instructions
    Unscrew the caliper bracket fastening. Use a drive socket #16. Use a tap wrench.
  7. Step 9
    How hard is it to do yourself: Wheel Bearing replacement on BMW Z3 Roadster M 3.2 2001 - download illustrated guide
    Remove the brake caliper together with its bracket.
    Replacement: wheel bearing – BMW Z3 (E36). Tip from AUTODOC experts:
    Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur.
  8. Step 10
    Need to know how to renew Wheel Bearing on BMW Z3 2002? This free workshop manual will help you to do it yourself
    Clean the brake disc fastener. Use a wire brush. Use WD-40 spray.
  9. Step 11
    Changing of Wheel Bearing on BMW Z3 Roadster 2003 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the brake disc fastening. Use HEX No.H6. Use an impact screwdriver.
  10. Step 12
    BMW Z3 1.9 i Wheel Bearing replacement: online guides and video tutorials
    Remove the brake disc.
  11. Step 13
    Replacing Wheel Bearing on BMW Z3 Roadster 1996 1.8 i by yourself
    Remove the wheel hub nut cap. Use a crowbar. Use a hammer.
  12. Step 14
    Z3 Roadster (E36) 3.0 i 1997 Wheel Bearing DIY replacement workshop manual
    Unstake the wheel hub retaining nut. Use a flat metal-working chisel. Use a hammer.
  13. Step 15
    How to change Wheel Bearing on BMW Z3 Roadster (E36) 1998 - tips and tricks
    Unscrew the hub nut. Use a drive socket #46. Use a tap wrench.
  14. Step 16
    Step-by-step recommendations for DIY replacement BMW Z3 Roadster 1999 3.0 i Wheel Bearing
    Remove the fastening nut.
  15. Step 17
    DIY replacement of Wheel Bearing on BMW Z3 Roadster (E36) 2.8 i 2000 is not an issue anymore with our step-by-step tutorial
    Remove the wheel hub together with the bearing. Use 3-Arm Gear Puller.
  16. Step 18
    How to change Wheel Bearing on BMW Z3 Roadster 1995 - free PDF and video manuals
    Pull the bearing inner race out of the wheel hub. Use a universal puller.
  17. Step 19
    How to replace BMW Z3 Roadster (E36) 1.8 i 1996 Wheel Bearing - step-by-step manuals and video guides
    Clean the hub bearing mounting seat. Use a wire brush. Use all-purpose cleaning spray.
  18. Step 20
    BMW Z3 Roadster 1.9 i 1997 Wheel Bearing replacement: free workshop manuals
    Install the new wheel hub with a bearing. Use a drive socket #46. Use a hammer.
  19. Step 21
    Changing Wheel Bearing on BMW Z3 Roadster (E36) 2.0 i 1998 by yourself
    Install the fastening nut.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
BMW Z3 Roadster (E36) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY BMW Z3 Roadster (E36) Wheel Bearing replacement - online guide
Tips & tricks for your BMW Z3 Roadster (E36)
View more
  • How to change Wheel bearings on BMW Z3 Roadster (E36) 2.8 i - replacement tricks
    How to easily repair a punctured tyre | AUTODOC tips
  • Changing Hub bearing BMW Z3 Roadster 1.8 i - Replacement Tips
    How do EGR valves work? | AUTODOC
  • Maintenance Hacks - BMW Z3 Roadster (E36) 1.9 i Wheel bearing kit replacement guide
    How to save when buying car parts
  • Replace Wheel hub bearing on BMW Z3 Roadster - free video tips
    Replacing your engine cooling fan | AUTODOC tips