Important!

This replacement procedure can be used for:
VW Transporter V Minibus (7HB, 7HJ, 7EB, 7EJ, 7EF, 7EG, 7HF, 7EC) 2.0 TDI, VW Transporter V Minibus (7HB, 7HJ, 7EB, 7EJ, 7EF, 7EG, 7HF, 7EC) 1.9 TDI, VW Transporter V Minibus (7HB, 7HJ, 7EB, 7EJ, 7EF, 7EG, 7HF, 7EC) 1.9 TDI, VW Transporter V Minibus (7HB, 7HJ, 7EB, 7EJ, 7EF, 7EG, 7HF, 7EC) 2.5 TDI, VW Transporter V Minibus (7HB, 7HJ, 7EB, 7EJ, 7EF, 7EG, 7HF, 7EC) 2.5 TDI, VW Transporter V Minibus (7HB, 7HJ, 7EB, 7EJ, 7EF, 7EG, 7HF, 7EC) 2.0, VW Transporter V Minibus (7HB, 7HJ, 7EB, 7EJ, 7EF, 7EG, 7HF, 7EC) VR6 3.2, VW Transporter V Minibus (7HB, 7HJ, 7EB, 7EJ, 7EF, 7EG, 7HF, 7EC) VR6 3.2, VW Transporter V Minibus (7HB, 7HJ, 7EB, 7EJ, 7EF, 7EG, 7HF, 7EC) 1.9 TDI, VW Transporter V Minibus (7HB, 7HJ, 7EB, 7EJ, 7EF, 7EG, 7HF, 7EC) 2.5 TDi, VW Transporter V Minibus (7HB, 7HJ, 7EB, 7EJ, 7EF, 7EG, 7HF, 7EC) 1.9 TDI, VW Transporter V Minibus (7HB, 7HJ, 7EB, 7EJ, 7EF, 7EG, 7HF, 7EC) 2.0 TSI, VW Transporter V Minibus (7HB, 7HJ, 7EB, 7EJ, 7EF, 7EG, 7HF, 7EC) 2.0 TDI, VW Transporter V Minibus (7HB, 7HJ, 7EB, 7EJ, 7EF, 7EG, 7HF, 7EC) 2.0 TDI, VW Transporter V Minibus (7HB, 7HJ, 7EB, 7EJ, 7EF, 7EG, 7HF, 7EC) 2.0 TDI, VW Transporter V Minibus (7HB, 7HJ, 7EB, 7EJ, 7EF, 7EG, 7HF, 7EC) 2.0 BiTDI, VW Transporter V Minibus (7HB, 7HJ, 7EB, 7EJ, 7EF, 7EG, 7HF, 7EC) 2.0 TSI … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Shock Absorber for Transporter V Minibus (7HB, 7HJ, 7EB, 7EJ, 7EF, 7EG, 7HF, 7EC) and other VW models

Shock absorber

        Shock absorber for Transporter T5 Minibus (7HB, 7HJ, 7EB, 7EJ, 7EF, 7EG, 7HF, 7EC) Diesel (114 hp)
      
        Shock absorber for Transporter T5 Minibus (7HB, 7HJ, 7EB, 7EJ, 7EF, 7EG, 7HF, 7EC) Diesel (85 hp)
      
        Shock absorber for Transporter T5 Minibus (7HB, 7HJ, 7EB, 7EJ, 7EF, 7EG, 7HF, 7EC) Diesel (105 hp)
      
        Shock absorber for Transporter T5 Minibus (7HB, 7HJ, 7EB, 7EJ, 7EF, 7EG, 7HF, 7EC) Diesel (130 hp)
      
        Shock absorber for Transporter T5 Minibus (7HB, 7HJ, 7EB, 7EJ, 7EF, 7EG, 7HF, 7EC) Diesel (174 hp)
      
        Shock absorber for Transporter T5 Minibus (7HB, 7HJ, 7EB, 7EJ, 7EF, 7EG, 7HF, 7EC) Petrol (115 hp)
      
        Shock absorber for Transporter T5 Minibus (7HB, 7HJ, 7EB, 7EJ, 7EF, 7EG, 7HF, 7EC) Petrol (231 hp)
      
        Shock absorber for Transporter T5 Minibus (7HB, 7HJ, 7EB, 7EJ, 7EF, 7EG, 7HF, 7EC) Petrol (235 hp)
      
        Shock absorber for Transporter T5 Minibus (7HB, 7HJ, 7EB, 7EJ, 7EF, 7EG, 7HF, 7EC) Diesel (102 hp)

Replacement: suspension strut – VW TRANSPORTER V Bus (7HB, 7HJ, 7EB, 7EJ, 7EF). Tools you might need:

                        Wire brush
                      
                        WD-40 spray
                      
                        Brake cleaner 
                      
                        Copper grease 
                      
                        Ceramic grease
                      
                        Torque wrench
                      
                        Combination spanner #19
                      
                        Combination spanner #21
                      
                        Drive socket # 18
                      
                        Drive socket # 19
                      
                        Drive socket # 21
                      
                        Drive socket # 30
                      
                        HEX bit No.H5
                      
                        HEX bit No.H7
                      
                        Torx bit T30
                      
                        Wheel impact socket #19
                      
                        Ratchet wrench
                      
                        Flat Screwdriver
                      
                        Hydraulic strut spring compressor
                      
                        Crow bar
                      
                        Flat chisel
                      
                        Hammer
                      
                        Pin punch
                      
                        Ball joint puller
                      
                        Clic-R collar pliers
                      
                        Hydraulic transmission jack
                      
                        Fender cover
                      
                        Wheel chock

Buy tools

Replacement: suspension strut – VW TRANSPORTER V Bus (7HB, 7HJ, 7EB, 7EJ, 7EF). Tip from AUTODOC:

Both shock struts of the front suspension should be replaced simultaneously.
The replacement procedure is identical for the left and right shock struts of the front suspension.
Please note: all work on the car – VW TRANSPORTER V Bus (7HB, 7HJ, 7EB, 7EJ, 7EF) – should be done with the engine switched off.

Carry out replacement in the following order:

Step 1

Secure the wheels with chocks.
Step 2

Loosen the wheel mounting bolts. Use wheel impact socket #19.
Step 3

Raise the front of the car and secure on supports.

Step 4

Unscrew the wheel bolts.

AUTODOC recommends:
Important! Hold the wheel while unscrewing the fastening bolts. VW TRANSPORTER V Bus (7HB, 7HJ, 7EB, 7EJ, 7EF)
Step 5

Remove the wheel.
Step 6

Clean the sway bar link fastener. Use a wire brush. Use WD-40 spray.
Step 7

Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #19. Use HEX No.H5. Use a ratchet wrench.
Step 8

Remove the stabilizer rod.
Step 9

Disconnect the wiring and the brake hose from the bracket on the shock strut. Use a crowbar.
Step 10

Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray.
Step 11

Unscrew the end fastening nut to the steering knuckle. Use a drive socket #21. Use a ratchet wrench.
Step 12

Disconnect the tie rod end from the steering knuckle. Use a ball joint puller.

Step 13

Clean the fasteners that connect the ball joint to the steering knuckle. Use a wire brush. Use WD-40 spray.
Step 14

Unscrew the ball joint fasteners from the steering knuckle. Use a drive socket #19. Use a ratchet wrench.
Step 15

Remove the fastening bolts.

Step 16

Unscrew the fastener connecting the drive shaft to the wheel hub. Use a drive socket #30. Use a ratchet wrench.
Step 17

Remove the fastening nut.

Step 18

Detach the driveshaft from the steering knuckle. Use a pin punch. Use a hammer.
Step 19

Disconnect the ball joint from the steering knuckle.

Step 20

Clean the fasteners connecting the shock strut to the steering knuckle. Use a wire brush. Use WD-40 spray.
Step 21

Unscrew the fasteners connecting the suspension strut to the steering knuckle. Use a drive socket #18. Use a ratchet wrench.
Step 22

Remove the fastening bolts.

Step 23

Release the lower fastener connecting the shock strut to the steering knuckle. Use a flat metal-working chisel. Use a hammer.
Step 24

Disconnect the steering knuckle from the shock absorber strut.
Step 25

Connect the ball joint to the steering knuckle.

Step 26

Lower the car.

Step 27

Open the bonnet.

Step 28

Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.

Step 29

Unplug the mass air flow sensor connector. Use a flat screwdriver.
Step 30

Release the air filter cover clips.
Step 31

Detach the air intake hose clamp. Use clic-R collar pliers.
Step 32

Disconnect the air intake pipe from the air filter housing.
Step 33

Take off the filter lid.
Step 34

Remove the air filter.

Step 35

Remove the cowl grille seal.
Step 36

Unscrew the mounting bolts of the protective cover. Use Torx T30. Use a ratchet wrench.
Step 37

Remove the protective cover.
Step 38

Remove the shock strut mount cap. Use a crowbar.
Step 39

Clean the upper fastener of the suspension strut mount. Use a wire brush. Use WD-40 spray.
Step 40

Unscrew the top fasteners of the suspension strut mount. Use a combination spanner #21. Use HEX No.H7. Use a ratchet wrench.

AUTODOC recommends:
Important! Hold the suspension strut while unscrewing the fastening bolts. VW TRANSPORTER V Bus (7HB, 7HJ, 7EB, 7EJ, 7EF)
Step 41

Remove the suspension strut.
Step 42

Set the shock absorber strut on the spring compressor tool.

Replacement: suspension strut – VW TRANSPORTER V Bus (7HB, 7HJ, 7EB, 7EJ, 7EF). Tip from AUTODOC:
Note that when using a spring compressor, spring coils need to be securely gripped, compressing the spring on the opposite sides.Ensure the correct position of the spring in the retainer.Make sure that the spring coils tightly entered the lock handles.
Step 43

Compress the spring.
Step 44

Treat the shock strut rod. Use a wire brush. Use WD-40 spray.
Step 45

Remove the strut piston rod nut. Use a combination spanner #21. Use HEX No.H7. Use a ratchet wrench.
Step 46

Remove the top strut mount. Use a crowbar.
Step 47

Remove the shock absorber dust cap and the bump stop.

AUTODOC recommends:
Replacement: suspension strut – VW TRANSPORTER V Bus (7HB, 7HJ, 7EB, 7EJ, 7EF). Carefully inspect the mount, the boot, and the bump stop of the shock absorber. Replace if necessary.
Step 48

Release the coil spring.
Step 49

Remove the spring.
Step 50

Remove the old shock absorber from the hydraulic coil spring compressor.

Replacement: suspension strut – VW TRANSPORTER V Bus (7HB, 7HJ, 7EB, 7EJ, 7EF). Tip:
Before installing a new shock absorber you should pump it manually 3-5 times.
Step 51

Install the new shock absorber on the hydraulic coil spring compressor.
Step 52

Install the spring on the shock absorber.
Step 53

Compress the spring.

Step 54

Install the dust sleeve and the bump stop on the new shock absorber.
Step 55

Install the upper strut mount and the strut mount bearing.
Step 56

Tighten the shock strut piston rod nut. Use a drive socket #21. Use HEX No.H7. Use a torque wrench. Tighten it to 80 Nm torque.
Step 57

Decompress the spring.
Step 58

Remove the assembled shock strut.

Step 59

Treat the shock strut rod. Use copper grease.
Step 60

Clean the mounting seats of the shock strut. Use a wire brush. Use WD-40 spray.
Step 61

Install the shock strut into the wheel arch.
Step 62

Screw in the top fasteners of the suspension strut mount.

AUTODOC recommends:
VW TRANSPORTER V Bus (7HB, 7HJ, 7EB, 7EJ, 7EF) – To avoid injury, hold the suspension strut while screwing in the fastening bolts.
Step 63

Tighten the upper fastener of the shock absorber strut mount. Use a combination spanner #21. Use HEX No.H7. Use a torque wrench. Tighten it to 80 Nm torque.
Step 64

Install the shock strut mount cap.
Step 65

Install the protective cover.
Step 66

Tighten the mounting bolts of the protective cover. Use Torx T30. Use a ratchet wrench.
Step 67

Install the cowl grille seal.
Step 68

Install the air filter.

Step 69

Reinstall the air filter cover. Fasten it.
Step 70

Connect the air intake pipe to the air filter housing.

Step 71

Fasten the clamp on the air intake hose. Use clic-R collar pliers.
Step 72

Press the air filter cover clips into place.
Step 73

Plug in the mass air flow sensor conntector.
Step 74

Remove the fender protection cover.

Step 75

Close the hood.

Step 76

Raise the front of the car and secure on supports.

Step 77

Release the lower fastener connecting the shock strut to the steering knuckle. Use a flat metal-working chisel. Use a hammer.
Step 78

Disconnect the ball joint from the steering knuckle.

Step 79

Fix the shock absorber strut on the steering knuckle. Use a crowbar. Use a hammer.
Step 80

Install the fastening bolts.

Step 81

Clean the splines of the drive shaft CV joint. Use a wire brush. Use WD-40 spray.
Step 82

Install the steering knuckle on the CV axle.
Step 83

Connect the ball joint to the steering knuckle.

Step 84

Install the fastening bolts.

Step 85

Tighten the fasteners that connect the ball joint to the steering knuckle. Use a drive socket #19. Use a torque wrench. Tighten it to 90 Nm torque.+45°
Step 86

Tighten the lower fasteners connecting the shock strut to the steering knuckle. Use a drive socket #18. Use a torque wrench. Tighten it to 75 Nm torque.+180°
Step 87

Connect the fastener of the ABS sensor cable to the shock absorber strut. Fasten the brake hose on the strut.
Step 88

Ιnstall the transverse stabilizer link.

Step 89

Tighten the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #19. Use HEX No.H5. Use a torque wrench. Tighten it to 60 Nm torque.+45°
Step 90

Connect the tie rod end to the steering knuckle.

Step 91

Tighten the fastening nut connecting the tie rod end to the steering knuckle. Use a drive socket #21. Use a torque wrench. Tighten it to 60 Nm torque.+90°
Step 92

Install the fastening nut.
Step 93

Tighten the drive shaft nut. Use a drive socket #30. Use a torque wrench. Tighten it to 200 Nm torque.
Step 94

Treat all joints of the arm. Treat the shock strut fasteners. Treat all tie rod end connections. Treat all joints of the stabiliser link. Use copper grease.
Step 95

Treat the surface where the brake disc contacts the wheel rim. Use ceramic grease.
Step 96

Clean the brake disk surface. Use a brake cleaner.
Step 97

Install the wheel.

AUTODOC recommends:
Warning! To avoid injury, hold the wheel while screwing in the fastening bolts on the car. VW TRANSPORTER V Bus (7HB, 7HJ, 7EB, 7EJ, 7EF)
Step 98

Screw in the wheel bolts. Use wheel impact socket #19.
Step 99

Lower the car and working in a cross order, tighten the wheel bolts. Use wheel impact socket #19. Use a torque wrench. Tighten it to 180 Nm torque.
Step 100

Remove the jacks and chocks.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the VW Transporter T5 Minibus (7HB, 7HJ, 7EB, 7EJ, 7EF, 7EG, 7HF, 7EC) model.

Browse tyres

How to change rear shock absorbers on VW Transporter V Minibus (7HB, 7HJ, 7EB, 7EJ, 7EF, 7EG, 7HF, 7EC) – replacement guide

Free download PDF
1.62 MB
How to change front coil springs on VW Transporter T5 Minibus (7HB, 7HJ, 7EB, 7EJ, 7EF, 7EG, 7HF, 7EC) – replacement guide

Free download PDF
5.35 MB
How to change rear coil springs on VW Transporter V Minibus (7HB, 7HJ, 7EB, 7EJ, 7EF, 7EG, 7HF, 7EC) – replacement guide

Free download PDF
1.35 MB
How to change rear brake pads on VW Transporter V Minibus (7HB, 7HJ, 7EB, 7EJ, 7EF, 7EG, 7HF, 7EC) – replacement guide

Free download PDF
1.57 MB
How to change front brake pads on VW Transporter V Minibus (7HB, 7HJ, 7EB, 7EJ, 7EF, 7EG, 7HF, 7EC) – replacement guide

Free download PDF
1.62 MB
How to change rear brake discs on VW Transporter V Minibus (7HB, 7HJ, 7EB, 7EJ, 7EF, 7EG, 7HF, 7EC) – replacement guide

Free download PDF
1.95 MB

How to change rear shock absorbers on VW T5 Transporter – replacement guide

Free download PDF
1.66 MB
How to change front suspension strut on VW T5 Transporter – replacement guide

Free download PDF
4.51 MB
How to change front suspension strut on VW Transporter VI Minibus (SGB, SGG, SGJ) – replacement guide

Free download PDF
4.25 MB
How to change rear shock absorbers on VW Transporter VI Minibus (SGB, SGG, SGJ) – replacement guide

Free download PDF
1.34 MB
How to change rear shock absorbers on VW Transporter T4 Van (70A, 70H, 7DA, 7DH) – replacement guide

Free download PDF
2.13 MB
How to change front shock absorbers on VW Transporter T4 Van (70A, 70H, 7DA, 7DH) – replacement guide

Free download PDF
2.41 MB

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!

Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.

Scan

To download the app:

- scan the QR code
- download from App Store
- download from Google Play

Replacing your engine cooling fan | AUTODOC tips

2K views

Published on: 15/11/2020
How and why to check your oil | AUTODOC tips

5K views

Published on: 23/02/2023
Top 5 tips to prevent car rust | AUTODOC tips

5K views

Published on: 27/07/2023
8 bad driving habits | AUTODOC tips

4K views

Published on: 01/04/2021