Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur. Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary.
Step 12
Remove the brake pads. Use a crowbar.
Replacement: brake pads – VOLVO C30. Tip:
Measure the brake disc thickness. Upon reaching the wear limit the part must be replaced.
Step 13
Treat the brake pads in the area where their surface comes into contact with the brake caliper bracket. Use anti-squeal paste.
Step 14
Treat the brake caliper piston. Use a brake cleaner.
AUTODOC recommends:
Replacement: brake pads – VOLVO C30. After applying the spray, wait a few minutes.
Step 15
Press in the brake caliper piston. Use brake caliper wind back tool.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your VOLVO C30 (533)
View more
TOP 8 mistakes car owners make | AUTODOC tips
How to remove rust | AUTODOC tips
How to start a car after a long idle period | AUTODOC tips
Petrol or diesel? What's the difference between these engines? | AUTODOC