When to replace the Brake Pads on your MERCEDES-BENZ SPRINTER
Recommended replacement interval for the part category Brake pad set : 30000 km
Important!
This replacement procedure can be used for:
MERCEDES-BENZ SPRINTER 3-t Box (906) 224 (906.613), MERCEDES-BENZ SPRINTER 3-t Box (906) 209 CDI (906.611, 906.613), MERCEDES-BENZ SPRINTER 3-t Box (906) 211 CDI (906.611, 906.613), MERCEDES-BENZ SPRINTER 3-t Box (906) 213 CDI (906.611, 906.613), MERCEDES-BENZ SPRINTER 3-t Box (906) 215 CDI (906.611, 906.613), MERCEDES-BENZ SPRINTER 3-t Box (906) 218 CDI (906.611, 906.613), MERCEDES-BENZ SPRINTER 3-t Box (906) 210 CDI (906.611, 906.613), MERCEDES-BENZ SPRINTER 3-t Box (906) 216 (906.613), MERCEDES-BENZ SPRINTER 3-t Box (906) 216 CDI (906.611, 906.613), MERCEDES-BENZ SPRINTER 3-t Box (906) 219 CDI / BlueTEC (906.611, 906.613), MERCEDES-BENZ SPRINTER 3-t Box (906) 213 CDI (906.611, 906.613), MERCEDES-BENZ SPRINTER 3-t Box (906) 211 CDI (906.611, 906.613), MERCEDES-BENZ SPRINTER 3-t Box (906) 214 CDI (906.611, 906.613) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Brake Pads for SPRINTER 3-t Box (906) and other MERCEDES-BENZ models
Tools
Replacement: brake pads – MERCEDES-BENZ SPRINTER 3-t Box (906). List of the tools you'll need:
Wire brush
Nylon cleaning brush
WD-40 spray
Brake cleaner
Anti-squeal paste
Copper grease
Torque wrench
HEX bit no.H6.
Wheel impact socket #17
Ratchet wrench
Flat Screwdriver
Brake caliper wind back tool
Round-nose pliers
Crow bar
Wheel chock
Replacement: brake pads – MERCEDES-BENZ SPRINTER 3-t Box (906). AUTODOC experts recommend:
  • Perform the replacement of brake pads in complete set for each axis. This provides effective braking.
  • The replacement procedure is identical for all brake pads on the same axle.
  • All work should be done with the engine stopped.
Replacement: brake pads – MERCEDES-BENZ SPRINTER 3-t Box (906). Use the following procedure:
  1. Step 1
    Open the bonnet. Unscrew the brake fluid reservoir cap.
    Step 2
    How to change Brake Pads on Mercedes Sprinter 3t Van 2006 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 3
    How to replace MERCEDES-BENZ SPRINTER 3-t Box (906) 210 CDI 2.2 (906.611, 906.613) 2007 Brake Pads - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 4
    Raise the front of the car and secure on supports.
    Step 5
    Mercedes Sprinter 3t Van 213 CDI 2.2 (906.611, 906.613) 2008 Brake Pads replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: brake pads – MERCEDES-BENZ SPRINTER 3-t Box (906). Tip:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 6
    Changing Brake Pads on MERCEDES-BENZ SPRINTER 3-t Box (906) 209 CDI 2.2 (906.611, 906.613) 2009 by yourself
    Remove the wheel.
  5. Step 7
    How to remove MERCEDES-BENZ SPRINTER 216 CDI 2.2 (906.611, 906.613) 2010 Brake Pads - online easy-to-follow instructions
    Remove the dust boot caps of the brake caliper guide pins.
  6. Step 8
    How to replace Brake Pads on MERCEDES-BENZ SPRINTER 3-t Box (906) 2011: download PDF manuals and video instructions
    Disconnect the brake pad wear sensor plug. Use round-nose pliers.
    Please note!
    Some cars are not equipped with the brake pad wear sensor.
  7. Step 9
    How hard is it to do yourself: Brake Pads replacement on Mercedes Sprinter 3t Van 218 CDI 3.0 (906.611, 906.613) 2012 - download illustrated guide
    Clean the brake caliper fasteners. Use a wire brush. Use WD-40 spray.
  8. Step 10
    Need to know how to renew Brake Pads on MERCEDES-BENZ SPRINTER 2013? This free workshop manual will help you to do it yourself
    Unscrew the brake caliper fastening. Use HEX No.H6. Use a ratchet wrench.
  9. Step 11
    Remove the guide pins from the brake caliper.
    Step 12
    Spread the brake pads. Use a crowbar.
    Step 13
    Changing of Brake Pads on Mercedes Sprinter 3t Van 2014 won't be an issue if you follow this illustrated step-by-step guide
    Remove the brake caliper.
    AUTODOC recommends:
    Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur. Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary.
  10. Step 14
    MERCEDES-BENZ SPRINTER 219 CDI / BlueTEC 3.0 (906.611, 906.613) Brake Pads replacement: online guides and video tutorials
    Remove the brake pads.
    Replacement: brake pads – MERCEDES-BENZ SPRINTER 3-t Box (906). AUTODOC experts recommend:
    Measure the brake disc thickness. Upon reaching the wear limit the part must be replaced.
  11. Step 15
    Replacing Brake Pads on Mercedes Sprinter 3t Van 2016 210 CDI 2.2 (906.611, 906.613) by yourself
    Clean the brake caliper bracket from dirt and dust. Use a wire brush. Use a brake cleaner.
    AUTODOC recommends:
    Replacement: brake pads – MERCEDES-BENZ SPRINTER 3-t Box (906). After applying the spray, wait a few minutes.
  12. Step 16
    SPRINTER 3-t Box (906) 216 CDI 2.2 (906.611, 906.613) 2017 Brake Pads DIY replacement workshop manual
    Remove the retaining springs of the brake pads. Use a flat screwdriver.
  13. Step 17
    How to change Brake Pads on MERCEDES-BENZ SPRINTER 3-t Box (906) 2018 - tips and tricks
    Install the retaining springs of the brake pads.
  14. Step 18
    Remove the brake pad wear sensor from the brake pad. Use a flat screwdriver.
    Step 19
    Step-by-step recommendations for DIY replacement Mercedes Sprinter 3t Van 2019 216 CDI 2.2 (906.611, 906.613) Brake Pads
    Treat the brake pads in the area where their surface comes into contact with the brake caliper bracket. Use anti-squeal paste.
    Replacement: brake pads – MERCEDES-BENZ SPRINTER 3-t Box (906). Tip from AUTODOC:
    Make sure the disc surface is clean before installing the pads.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
MERCEDES-BENZ SPRINTER 3-t Box (906) Brake Pads replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY MERCEDES-BENZ SPRINTER 3-t Box (906) Brake Pads replacement - online guide
Tips & tricks for your MERCEDES-BENZ SPRINTER 3-t Box (906)
View more
  • How to change Brake pad set on MERCEDES-BENZ SPRINTER 3-t Box (906) 211 CDI 2.2 (906.611, 906.613) - replacement tricks
    What to do if your car heater isn't working | AUTODOC tips
  • Changing Disc pads Mercedes Sprinter 3t Van 210 CDI 2.2 (906.611, 906.613) - Replacement Tips
    TOP 5 mistakes when replacing shock absorbers | AUTODOC tips
  • Maintenance Hacks - MERCEDES-BENZ SPRINTER 3-t Box (906) 213 CDI 2.2 (906.611, 906.613) Brake pad kit replacement guide
    How to paint a car with a spray can | AUTODOC tips
  • Replace Disc brake pads on Mercedes Sprinter 3t Van - free video tips
    Why do your brakes squeak? | AUTODOC tips