
Disclaimer
How to change front brake discs on BMW E92 – replacement guide
downloads:
30
Views:
651

Recommended replacement interval for the part category Brake disc : 50000 km
Important!
This replacement procedure can be used for:
BMW 3 Coupe (E92) 325i, BMW 3 Coupe (E92) 325 i, BMW 3 Coupe (E92) 325i, BMW 3 Coupe (E92) 330i, BMW 3 Coupe (E92) 325 xi, BMW 3 Coupe (E92) 330 xi, BMW 3 Coupe (E92) 330i, BMW 3 Coupe (E92) 330 xi, BMW 3 Coupe (E92) 325 d, BMW 3 Coupe (E92) 325xi, BMW 3 Coupe (E92) 330d, BMW 3 Coupe (E92) 330 xd, BMW 3 Coupe (E92) 325i xDrive, BMW 3 Coupe (E92) 330 i xDrive, BMW 3 Coupe (E92) 330 d xDrive, BMW 3 Coupe (E92) 325d, BMW 3 Coupe (E92) 325 i, BMW 3 Coupe (E92) 330xi 3.0, BMW 3 Coupe (E92) 325xi, BMW 3 Coupe (E92) 325i xDrive … View more
The steps may slightly vary depending on the car design.
BMW 3 Coupe (E92) 325i, BMW 3 Coupe (E92) 325 i, BMW 3 Coupe (E92) 325i, BMW 3 Coupe (E92) 330i, BMW 3 Coupe (E92) 325 xi, BMW 3 Coupe (E92) 330 xi, BMW 3 Coupe (E92) 330i, BMW 3 Coupe (E92) 330 xi, BMW 3 Coupe (E92) 325 d, BMW 3 Coupe (E92) 325xi, BMW 3 Coupe (E92) 330d, BMW 3 Coupe (E92) 330 xd, BMW 3 Coupe (E92) 325i xDrive, BMW 3 Coupe (E92) 330 i xDrive, BMW 3 Coupe (E92) 330 d xDrive, BMW 3 Coupe (E92) 325d, BMW 3 Coupe (E92) 325 i, BMW 3 Coupe (E92) 330xi 3.0, BMW 3 Coupe (E92) 325xi, BMW 3 Coupe (E92) 325i xDrive … View more
The steps may slightly vary depending on the car design.
How to change front brake discs / front brake rotors on BMW 330i 3 (E92) [TUTORIAL AUTODOC]

All the parts you need to replace – Brake Discs for 3 Coupe (E92) and other BMW models
Brake disc
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Anti-squeal paste
Copper grease
HEX bit No.H5.
HEX bit No.H7.
Drive socket # 17
Wheel impact socket #17
Brake caliper wind back tool
Ratchet wrench
Torque wrench
Tap wrench
Impact screwdriver
Crow bar
Fender cover
Wheel chock
Replacement: brake discs – BMW E92. Tip from AUTODOC experts:
- Replace the brake disks on the car BMW E92 in complete set for each axis. Regardless of the state of components. This will ensure even braking.
- The replacement procedure is identical for both brake disks on the same axle.
- When changing the brake discs, always replace the brake pads.
- All work should be done with the engine stopped.
Replacement: brake discs – BMW E92. Recommended sequence of steps:
- Step 1Open the hood.
- Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
- Step 3Remove the wiper arm cover.
- Step 4Unscrew the brake fluid reservoir cap.
- Step 5Secure the wheels with chocks.Step 6Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 7Raise the front of the car and secure on supports.
- Step 8Unscrew the wheel bolts.Replacement: brake discs – BMW E92. Tip:To avoid injury, hold up the wheel when unscrewing the bolts.
- Step 9Remove the wheel.
- Step 10Remove the dust boot caps of the brake caliper guide pins. Use a crowbar.
- Step 11Unscrew the brake caliper fastening. Use HEX No.H7. Use a ratchet wrench.
- Step 12Spread the brake pads. Use a crowbar.
- Step 13Detach the brake caliper retaining spring. Use a crowbar.
- Step 14Remove the brake caliper.Replacement: brake discs – BMW E92. Professionals recommend:Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur. Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary.
- Step 15Remove the brake pads.
- Step 16Clean the brake caliper bracket fasteners. Use a wire brush. Use WD-40 spray.
- Step 17Unscrew the caliper bracket fastening. Use a drive socket #17. Use a tap wrench.
- Step 18Remove the caliper bracket.
- Step 19Clean the brake disc fasteners. Use a wire brush. Use WD-40 spray.
- Step 20Unscrew the brake disc fastening. Use HEX No.H5. Use an impact screwdriver.
- Step 21Remove the brake disc.
- Step 22Clean the hub. Use a wire brush. Treat the contacting surface. Use copper grease.
- Step 23Install the brake disc.
- Step 24Tighten the brake disc fastening. Use HEX No.H5. Use a torque wrench. Tighten it to 16 Nm torque.
- Step 25Clean the brake caliper bracket from dirt and dust. Use a wire brush. Use a brake cleaner.AUTODOC recommends:Replacement: brake discs – BMW E92. After applying the spray, wait a few minutes.
- Step 26Install the brake caliper bracket.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the BMW 3 Coupe (E92) model
Popular maintenance tutorials for E92
Complete guides for changing the Brake rotors on different BMW 3 SERIES models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your BMW 3 Coupe (E92)
View more
- 7 signs of faulty fuel injectors | AUTODOC tips
- How to Polish Your Car Yourself and Save Money on Garage Services | AUTODOC tips
- How to Get the Best Deals on Car Parts | Save Money with AUTODOC
- How do EGR valves work? | AUTODOC
Most commonly replaced car parts on BMW 3 SERIES
Time to replace parts? Get even better deals in our Shop app.

SCAN ME