Disclaimer
How to change front ball joint on RENAULT Symbol / Thalia I (LB) – replacement guide
downloads:
1
Views:
13
Important!
This replacement procedure can be used for:
RENAULT Thalia I (LB_) 1.5 dCi, RENAULT Thalia I (LB_) 1.4 16V … View more
The steps may slightly vary depending on the car design.
RENAULT Thalia I (LB_) 1.5 dCi, RENAULT Thalia I (LB_) 1.4 16V … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Suspension Ball Joint for Thalia I (LB_) and other RENAULT models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #16
Combination spanner #18
Drive socket # 16
Drive socket # 18
Wheel impact socket #19
Ratchet wrench
Flat chisel
Crow bar
Hammer
Wheel chock
Replacement: ball joint – RENAULT THALIA I (LB0/1/2_). AUTODOC experts recommend:
- The replacement procedure is identical for the left and right ball joints.
- Please note: all work on the car – RENAULT THALIA I (LB0/1/2_) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Secure the wheels with chocks.Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 3Raise the car.Replacement: ball joint – RENAULT THALIA I (LB0/1/2_). Tip from AUTODOC experts:If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. RENAULT THALIA I (LB0/1/2_) - Step 5
Remove the wheel. - Step 6
Clean the fastener connecting the ball joint to the steering knuckle. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the ball joint fastening to the steering knuckle. Use a combination spanner #16. Use a drive socket #16. Use a ratchet wrench. - Step 8
Unscrew the caliper bracket fastening. Use a drive socket #18. Use a ratchet wrench. - Step 9
Remove the fastening bolt. - Step 10
Clean the fasteners connecting the ball joint to the suspension control arm. Use a wire brush. Use WD-40 spray. - Step 11
Unscrew the fastener connecting the ball joint to the suspension control arm. Use a combination spanner #18. Use a drive socket #18. Use a ratchet wrench. - Step 12
Release the fastener connecting the ball joint to the steering knuckle. Use a crowbar. - Step 13
Disconnect the ball joint from the control arm. - Step 14
Disconnect the ball joint from the steering knuckle. Use a flat metal-working chisel. Use a hammer. - Step 15Clean the ball joint mounting seat. Use a wire brush.Step 16Install a new ball joint.Replacement: ball joint – RENAULT THALIA I (LB0/1/2_). AUTODOC experts recommend:Do not damage the ball joint cover.Step 17
Treat the fasteners of the ball joint. Use copper grease. - Step 18
Connect the ball joint to the steering knuckle. - Step 19
Attach the ball joint to the control arm.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Symbol / Thalia I (LB) model
Popular maintenance tutorials for Renault Symbol Thalia
Complete guides for changing the Suspension ball joint on different RENAULT SYMBOL / THALIA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT Thalia I (LB_)
View more
BMW E30 Turbo Suspension Swap: Boost Your Handling | AUTODOC project
Top 5 reasons why the suspension knocks | AUTODOC tips
#TPMS Explained: Why Your Light is On and How to Respond Safely
Coolant comparison test | AUTODOC
Most commonly replaced car parts on RENAULT SYMBOL / THALIA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME






























