Replacement: anti roll bar links – VW PASSAT (3B2). Tip from AUTODOC:
Replace the stabiliser links on VW PASSAT (3B2) in pairs.
The replacement procedure is identical for both stabiliser links on the same axle.
All work should be done with the engine stopped.
Replacement: anti roll bar links – VW PASSAT (3B2). Use the following procedure:
Step 1
Secure the wheels with chocks.
Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17.
Step 3
Raise the front of the car and secure on supports.
Step 4
Unscrew the wheel bolts.
Replacement: anti roll bar links – VW PASSAT (3B2). Tip:
To avoid injury, hold up the wheel when unscrewing the bolts.
Step 5
Remove the wheel.
Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
Step 7
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #16 (2 pieces).
Step 8
Unscrew the fastener connecting the stabilizer bar with the control arm. Use a combination spanner #16 (2 pieces).
Step 9
Remove the stabilizer rod.
Replacement: anti roll bar links – VW PASSAT (3B2). AUTODOC experts recommend:
Examine stabiliser bushes. Replace them if needed.
Step 10
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
Step 11
Install a new rod, tighten the fasteners.
Step 12
Tighten the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #16. Use a drive socket #16. Use a torque wrench. Tighten it to 40 Nm torque.+90°
AUTODOC recommends:
Important! Be sure to use new fasteners.
Step 13
Tighten the fastener connecting the stabilizer bar with the control arm. Use a combination spanner #16. Use a drive socket #16. Use a torque wrench. Tighten it to 40 Nm torque.+90°
AUTODOC recommends:
Important! Be sure to use new fasteners.
Step 14
Treat all joints of the stabiliser link. Use copper grease.
Step 15
Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
Step 16
Clean the brake disk surface. Use a brake cleaner.
AUTODOC recommends:
Replacement: anti roll bar links – VW PASSAT (3B2). After applying the spray, wait a few minutes.
Step 17
Install the wheel.
Replacement: anti roll bar links – VW PASSAT (3B2). AUTODOC experts recommend:
To avoid injury, hold up the wheel when screwing in the fastening bolts.
Step 18
Screw in the wheel bolts. Use wheel impact socket #17.
Step 19
Lower the car and working in a cross order, tighten the wheel bolts. Use a torque wrench. Tighten it to 120 nm torque.
Step 20
Remove the jacks and chocks.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your VW PASSAT (3B2)
View more
Things you should never do with an automatic transmission | AUTODOC tips
What to check when buying a used car | AUTODOC tips
How to shine your tyres | AUTODOC tips
What to do if your car's air conditioning isn't working properly | AUTODOC tips