Important!

This replacement procedure can be used for:
VW CADDY ALLTRACK Box (SAA) 1.0 TSI, VW CADDY ALLTRACK Box (SAA) 1.2 TSI, VW CADDY ALLTRACK Box (SAA) 1.4 TGI CNG, VW CADDY ALLTRACK Box (SAA) 1.4 TSI, VW CADDY ALLTRACK Box (SAA) 2.0 TDI, VW CADDY ALLTRACK Box (SAA) 2.0 TDI, VW CADDY ALLTRACK Box (SAA) 2.0 TDI 4motion, VW CADDY ALLTRACK Box (SAA) 2.0 TDI, VW CADDY ALLTRACK Box (SAA) 2.0 TDI 4motion, VW CADDY ALLTRACK Box (SAA) 1.4 TSI, VW CADDY ALLTRACK Box (SAA) 2.0 TDI 4motion, VW CADDY ALLTRACK Box (SAA) 2.0 TDI 4motion, VW CADDY ALLTRACK Box (SAA) 2.0 TDI, VW CADDY ALLTRACK Box (SAA) 1.6 TDI, VW CADDY ALLTRACK Box (SAA) 1.6 TDI … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for CADDY ALLTRACK Box (SAA) and other VW models

Anti-roll bar link

Rod / Strut, wheel suspension

Repair Kit, stabilizer suspension

Mounting, stabilizer coupling rod

        Anti-roll bar link for VW CADDY ALLTRACK Box (SAA) 1.0 TSI Petrol (102 hp)
      
        Anti-roll bar link for VW CADDY ALLTRACK Box (SAA) 1.2 TSI Petrol (84 hp)
      
        Anti-roll bar link for VW CADDY ALLTRACK Box (SAA) 1.4 TGI CNG Petrol/Natural Gas (CNG) (110 hp)
      
        Anti-roll bar link for VW CADDY ALLTRACK Box (SAA) 1.4 TSI Petrol (125 hp)
      
        Anti-roll bar link for VW CADDY ALLTRACK Box (SAA) 2.0 TDI Diesel (75 hp)
      
        Anti-roll bar link for VW CADDY ALLTRACK Box (SAA) 2.0 TDI Diesel (102 hp)
      
        Anti-roll bar link for VW CADDY ALLTRACK Box (SAA) 2.0 TDI 4motion Diesel (122 hp)
      
        Anti-roll bar link for VW CADDY ALLTRACK Box (SAA) 2.0 TDI Diesel (150 hp)
      
        Anti-roll bar link for VW CADDY ALLTRACK Box (SAA) 2.0 TDI 4motion Diesel (150 hp)

Replacement: anti roll bar links – VW CADDY ALLTRACK Box (SAA). Tools you might need:

                        Wire brush
                      
                        WD-40 spray
                      
                        Brake cleaner 
                      
                        Copper grease 
                      
                        Torque wrench
                      
                        Combination spanner #18
                      
                        Drive socket # 18 
                      
                        XZN socket bit # 6
                      
                        Wheel impact socket #17
                      
                        Ratchet wrench
                      
                        Wheel chock

Buy tools

AUTODOC recommends:

Replace the stabiliser links on VW CADDY ALLTRACK Box (SAA) in pairs.
The replacement procedure is identical for both stabiliser links on the same axle.
Please note: all work on the car – VW CADDY ALLTRACK Box (SAA) – should be done with the engine switched off.

Carry out replacement in the following order:

Step 1

Secure the wheels with chocks.

Step 2

Loosen the wheel mounting bolts. Use wheel impact socket #17.
Step 3

Raise the front of the car and secure on supports.

Step 4

Unscrew the wheel bolts.

AUTODOC recommends:
Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. VW CADDY ALLTRACK Box (SAA)
Step 5

Remove the wheel.
Step 6

Clean all joints of the stabiliser link. Use a wire brush. Use WD-40 spray.
Step 7

Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #18. Use a ratchet wrench.
Step 8

Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #18. Use XZN #6. Use a ratchet wrench.
Step 9

Remove the stabilizer rod.
Step 10

Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
Step 11

Ιnstall the transverse stabilizer link.
Step 12

Tighten the stabiliser link fastener. Use a combination spanner #18. Use XZN #6. Use a ratchet wrench.
Step 13

Tighten the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #18. Use a drive socket #18. Use XZN #6. Use a torque wrench. Tighten it to 55 Nm torque.
Step 14

Tighten the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #18. Use a drive socket #18. Use XZN #6. Use a torque wrench. Tighten it to 55 Nm torque.
Step 15

Treat all joints of the stabiliser link. Use copper grease.
Step 16

Clean the wheel rim mounting seat. Use a wire brush.

Step 17

Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
Step 18

Clean the brake disk surface. Use a brake cleaner.

AUTODOC recommends:
Replacement: anti roll bar links – VW CADDY ALLTRACK Box (SAA). After applying the spray, wait a few minutes.
Step 19

Install the wheel.

AUTODOC recommends:
Warning! To avoid injury, hold the wheel while screwing in the fastening bolts on the car. VW CADDY ALLTRACK Box (SAA)
Step 20

Screw in the wheel bolts. Use wheel impact socket #17.
Step 21

Lower the car and working in a cross order, tighten the wheel bolts. Use wheel impact socket #17. Use a torque wrench. Tighten it to 120 Nm torque.
Step 22

Remove the jacks and chocks.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

How to change front strut mount on VW CADDY ALLTRACK Box (SAA) – replacement guide

Free download PDF
2.95 MB
How to change track rod end on VW Caddy Alltrack IV Van (SAA) – replacement guide

Free download PDF
2.22 MB
How to change rear wheel bearing on VW CADDY ALLTRACK Box (SAA) – replacement guide

Free download PDF
2.22 MB
How to change front wheel bearing on VW CADDY ALLTRACK Box (SAA) – replacement guide

Free download PDF
3.56 MB
How to change front brake pads on VW CADDY ALLTRACK Box (SAA) – replacement guide

Free download PDF
1.57 MB
How to change rear brake discs on VW CADDY ALLTRACK Box (SAA) – replacement guide

Free download PDF
1.65 MB

How to change rear anti roll bar links on VW Caddy 3 van – replacement guide

Free download PDF
1.51 MB
How to change front anti roll bar links on VW Caddy 3 van – replacement guide

Free download PDF
1.2 MB
How to change front anti roll bar links on VW Caddy IV Van (SAA, SAH) – replacement guide

Free download PDF
2.08 MB
How to change front anti roll bar links on VW Caddy III Estate (2KB, 2KJ, 2CB, 2CJ) – replacement guide

Free download PDF
2.06 MB
How to change rear anti roll bar links on VW Caddy III Estate (2KB, 2KJ, 2CB, 2CJ) – replacement guide

Free download PDF
1.52 MB
How to change front anti roll bar links on VW Caddy IV Kombi (SAB, SAJ) – replacement guide

Free download PDF
2.06 MB

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!

Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.

Scan

To download the app:

- scan the QR code
- download from App Store
- download from Google Play

DIY valve cover restoration | AUTODOC tips

6K views

Published on: 29/06/2023
Why do your brakes squeak? | AUTODOC tips

6K views

Published on: 19/01/2021
Petrol or diesel? What's the difference between these engines? | AUTODOC

4K views

Published on: 04/05/2021
How to restore wheel rims | AUTODOC tips

6K views

Published on: 13/05/2021