Disclaimer
How to change front anti roll bar links on VOLVO C70 II Convertible (542) – replacement guide
downloads:
6
Views:
49
Important!
This replacement procedure can be used for:
VOLVO C70 II Convertible (542) D3, VOLVO C70 II Convertible (542) D4, VOLVO C70 II Convertible (542) 2.4, VOLVO C70 II Convertible (542) 2.4 i, VOLVO C70 II Convertible (542) T5, VOLVO C70 II Convertible (542) D5, VOLVO C70 II Convertible (542) T5, VOLVO C70 II Convertible (542) 2.0 D, VOLVO C70 II Convertible (542) 2.4 D … View more
The steps may slightly vary depending on the car design.
VOLVO C70 II Convertible (542) D3, VOLVO C70 II Convertible (542) D4, VOLVO C70 II Convertible (542) 2.4, VOLVO C70 II Convertible (542) 2.4 i, VOLVO C70 II Convertible (542) T5, VOLVO C70 II Convertible (542) D5, VOLVO C70 II Convertible (542) T5, VOLVO C70 II Convertible (542) 2.0 D, VOLVO C70 II Convertible (542) 2.4 D … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for C70 II Convertible (542) and other VOLVO models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Impact socket №15
Combination spanner #15
Combination spanner #17
Wheel impact socket #19
Ratchet wrench
Torque wrench
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on VOLVO C70 II Convertible in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – VOLVO C70 II Convertible. Recommended sequence of steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. VOLVO C70 II Convertible - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #15. Use a combination spanner #17. - Step 8
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 9
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #17. Use a drive socket #15. Use a ratchet wrench. - Step 10
Remove the stabilizer rod.Replacement: anti roll bar links – VOLVO C70 II Convertible. AUTODOC recommends:Examine stabiliser bushes. Replace them if needed. - Step 11
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 12
Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VOLVO C70 II Convertible (542) model
Popular maintenance tutorials for Volvo C70 Convertible
Complete guides for changing the Drop links on different VOLVO C70 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VOLVO C70 II Convertible (542)
View more
CHECK ENGINE light turned on – step-by-step guide on what to do
Top 5 brake repair mistakes | AUTODOC tips
5 more brake repair mistakes | Stop making these brake repair mistakes
How to make an injector test bench yourself
Most commonly replaced car parts on VOLVO C70
Time to replace parts? Get even better deals in our Shop app.

SCAN ME





























