How to change front anti roll bar links on VAUXHALL Vivaro Combi (X82) – replacement guide
VAUXHALL Vivaro Combi (X82) 1.6 CDTi, VAUXHALL Vivaro Combi (X82) 1.6 CDTi, VAUXHALL Vivaro Combi (X82) 1.6 CDTi, VAUXHALL Vivaro Combi (X82) 1.6 CDTi, VAUXHALL Vivaro Combi (X82) 1.6 CDTi, VAUXHALL Vivaro Combi (X82) 1.6 CDTi, VAUXHALL Vivaro Combi (X82) 1.6 CDTI, VAUXHALL Vivaro Combi (X82) 1.6 CDTi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
Anti-roll bar link
- Replace the anti-roll bar links and bushes in pairs.
- The replacement procedure is identical for the anti-roll bar links and bushes on both sides of the same axle.
- All the work should be carried out with the ignition switched off.
- Step 1
Secure the wheels with chocks.
- Step 2
Loosen the fasteners of the front wheels. Use a 19 mm wheel impact socket. Use a tommy bar.
- Step 3
Raise the vehicle.
Replacement: anti roll bar links – VAUXHALL VIVARO Combi. Tip:If you are using a jack, make sure the car is parked on a hard, flat surface.Make sure to additionally secure the car with jack stands.
Step 4
Unscrew the wheel fasteners.
Caution!To avoid injury, hold up the wheel when unscrewing the fasteners.
- Step 5
Remove the wheel.
- Step 6
Clean the fasteners of the anti-roll bar link. Use a wire brush. Use WD-40 spray.
- Step 7
Unscrew the fastener connecting the anti-roll bar link to the suspension strut. Use a 16 mm combination spanner. Use an H5 Allen key to secure the ball stud. Use a ratchet wrench.
- Step 8
Unscrew the fastener connecting the anti-roll bar link to the anti-roll bar. Use a 16 mm combination spanner. Use an H5 Allen key to secure the ball stud. Use a ratchet wrench.
- Step 9
Remove the anti-roll bar link.
- Step 10
Clean the mounting seats of the anti-roll bar link. Use a wire brush. Use an all-purpose cleaning spray.
- Step 11
Remove the other wheel.
Step 12
Follow the same steps to remove the other anti-roll bar link.
- Step 13
Install a new anti-roll bar link and its fasteners. Use a 16 mm combination spanner. Use an H5 Allen key to secure the ball stud. Use a ratchet wrench.
Find out which tyre and wheel sizes are compatible with the VAUXHALL Vivaro Combi (X82) model
Popular maintenance tutorials for Vivaro X82
Free download PDF 1.95 MB
Free download PDF 1.44 MB
Free download PDF 6.28 MB
Free download PDF 1.48 MB
Free download PDF 1.68 MB
Free download PDF 7.06 MB
Complete guides for changing the Drop links on different VAUXHALL VIVARO models
Free download PDF 1.73 MB
Free download PDF 1.73 MB
Free download PDF 1.73 MB
Free download PDF 1.73 MB
Free download PDF 1.68 MB
Free download PDF 972.8 KB
Track expenses, manage logs, schedule replacements, and more.
Drive with Care: 8 Common Bad Driving Habits Explained | AUTODOC
Why does it burn oil? The main cause of oil consumption in EA888 Gen 1
How to service a used car after buying it
How to Safely Wash Your Car in Winter Without Damage | AUTODOC tips
Most commonly replaced car parts on VAUXHALL VIVARO
