Important!

This replacement procedure can be used for:
TOYOTA HILUX III Platform/Chassis (KUN1_, TGN3_, TGN2_, TGN1_, KUN2 3.0 D 4WD (KUN26) … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for HILUX III Platform/Chassis (KUN1_, TGN3_, TGN2_, TGN1_, KUN2 and other TOYOTA models

Anti-roll bar link

Anti-roll bar link for TOYOTA HILUX III Platform/Chassis (KUN1_, TGN3_, TGN2_, TGN1_, KUN2 3.0 D 4WD (KUN26) Diesel (171 hp)

Replacement: anti roll bar links – TOYOTA HILUX III Platform/Chassis (KUN1_, TGN3_, TGN2_, TGN1_, KUN2. Tools you might need:

                        Wire brush
                      
                        WD-40 spray
                      
                        Copper grease 
                      
                        Combination spanner #17
                      
                        Drive socket # 17 
                      
                        Drive socket # 22 
                      
                        HEX bit No.H6
                      
                        Wheel impact socket #21
                      
                        Torque wrench
                      
                        Wheel chock

Buy tools

AUTODOC recommends:

Replace the stabiliser links on TOYOTA HILUX III Platform/Chassis (KUN1_, TGN3_, TGN2_, TGN1_, KUN2 in pairs.
The replacement procedure is identical for both stabiliser links on the same axle.
All work should be done with the engine stopped.

Replacement: anti roll bar links – TOYOTA HILUX III Platform/Chassis (KUN1_, TGN3_, TGN2_, TGN1_, KUN2. Recommended sequence of steps:

Step 1

Secure the wheels with chocks.
Step 2

Loosen the wheel mounting bolts. Use wheel impact socket #21.
Step 3

Raise the front of the car and secure on supports.

Step 4

Unscrew the wheel bolts.

AUTODOC recommends:
Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. TOYOTA HILUX III Platform/Chassis (KUN1_, TGN3_, TGN2_, TGN1_, KUN2
Step 5

Remove the wheel.
Step 6

Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
Step 7

Unscrew the fasteners connecting the stabilizer link to the steering knuckle. Use a combination spanner #17. Use a drive socket #17. Use HEX No.H6.
Step 8

Detach the stabilizer link from the steering knuckle.
Step 9

Unscrew the fasteners connecting the stabiliser link to the stabiliser bar. Use a combination spanner #17. Use HEX No.H6.
Step 10

Remove the stabilizer rod.

Replacement: anti roll bar links – TOYOTA HILUX III Platform/Chassis (KUN1_, TGN3_, TGN2_, TGN1_, KUN2. Tip from AUTODOC experts:
Examine stabiliser bushes. Replace them if needed.
Step 11

Treat all joints of the stabiliser link. Use copper grease.
Step 12

Ιnstall the transverse stabilizer link.
Step 13

Attach the stabilizer link to the steering knuckle.
Step 14

Tighten the lock nut of the stabilizer link. Use a drive socket #22. Use a torque wrench. Tighten it to 55 Nm torque.
Step 15

Tighten the lock nut of the stabilizer link. Use a drive socket #22. Use a torque wrench. Tighten it to 50 Nm torque.
Step 16

Tighten the fastener connecting the stabilizer link to the stabilizer bar.
Step 17

Tighten the fasteners connecting the stabilizer link to the steering knuckle. Use a drive socket #17. Use a torque wrench. Tighten it to 65 Nm torque.
Step 18

Treat all joints of the stabiliser link. Use copper grease.
Step 19

Clean the wheel rim mounting seat. Use a wire brush. Treat the contacting surface. Use copper grease.

Step 20

Install the wheel.

AUTODOC recommends:
Important! Hold the wheel while screwing in the fastening bolts. TOYOTA HILUX III Platform/Chassis (KUN1_, TGN3_, TGN2_, TGN1_, KUN2
Step 21

Screw in the wheel bolts. Use wheel impact socket #21.
Step 22

Lower the car and working in a cross order, tighten the wheel bolts. Use wheel impact socket #21. Use a torque wrench. Tighten it to 112 Nm torque.
Step 23

Remove the jacks and chocks.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

How to change front brake pads on TOYOTA HILUX III Platform/Chassis (KUN1_, TGN3_, TGN2_, TGN1_, KUN2 – replacement guide

Free download PDF
1.83 MB
How to change front windshield wipers on TOYOTA Hilux VII Platform / Chassis – replacement guide

Free download PDF
1.39 MB
How to change pollen filter on TOYOTA HILUX III Platform/Chassis (KUN1_, TGN3_, TGN2_, TGN1_, KUN2 – replacement guide

Free download PDF
675.84 KB
How to change engine oil and filter on Toyota Aygo AB1 – replacement guide

Free download PDF
2.32 MB
How to change rear brake shoes on Toyota Yaris P1 – replacement guide

Free download PDF
2.32 MB
How to change serpentine belt on Toyota Aygo AB1 – replacement guide

Free download PDF
2.36 MB

How to change front anti roll bar links on TOYOTA HILUX III Pickup (TGN1_, GGN2_, GGN1_, KUN2_, KUN1_) – replacement guide

Free download PDF
1.66 MB
How to change front anti roll bar links on TOYOTA HILUX Pickup (GUN1_) – replacement guide

Free download PDF
1.66 MB
How to change front anti roll bar links on TOYOTA HILUX VIII Platform/Chassis (_N1_) – replacement guide

Free download PDF
1.65 MB
How to change anti roll bar links on a car – replacement tutorial

Universal

Free download PDF
972.8 KB
How to change front anti roll bar links on Toyota Yaris P1 – replacement guide

Free download PDF
1.61 MB
How to change rear anti roll bar links on Toyota Prado J120 – replacement guide

Free download PDF
1.68 MB

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!

Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.

Scan

To download the app:

- scan the QR code
- download from App Store
- download from Google Play

DIY valve cover restoration | AUTODOC tips

6K views

Published on: 29/06/2023
Important differences between car tools | AUTODOC tips

7K views

Published on: 16/12/2021
Top 5 tips to prevent car rust | AUTODOC tips

5K views

Published on: 27/07/2023
How to easily repair a punctured tyre | AUTODOC tips

3K views

Published on: 25/02/2021