Important!
This replacement procedure can be used for:
KIA SORENTO I (JC) 2.5 CRDi, KIA SORENTO I (JC) 2.5 CRDi, KIA SORENTO I (JC) 2.5 CRDi, KIA SORENTO I (JC) 2.5 CRDi 4WD, KIA SORENTO I (JC) 2.4, KIA SORENTO I (JC) 3.5 V6 4WD, KIA SORENTO I (JC) 3.3 V6 4WD, KIA SORENTO I (JC) 3.8 4WD, KIA SORENTO I (JC) 3.5, KIA SORENTO I (JC) 3.3, KIA SORENTO I (JC) 3.3 4WD, KIA SORENTO I (JC) 3.3, KIA SORENTO I (JC) 3.8 View more

The steps may slightly vary depending on the car design.

How to change front anti roll bar link on KIA SORENTO BL TUTORIAL | AUTODOC

video
All the parts you need to replace – Anti Roll Bar Links for SORENTO I (JC) and other KIA models
How to change Anti-roll bar link on KIA Sorento jc 2.5 CRDi – step-by-step instructions for straightforward car repair Anti-roll bar link
How to change Repair Kit, stabilizer suspension on KIA Sorento jc 2.5 CRDi – step-by-step instructions for straightforward car repair Repair Kit, stabilizer suspension
How to change Mounting, stabilizer coupling rod on KIA Sorento jc 2.5 CRDi – step-by-step instructions for straightforward car repair Mounting, stabilizer coupling rod
Tools
Replacement: anti roll bar links – KIA Sorento JC. Tools you might need:
Wire brush
WD-40 spray
Copper grease
Combination spanner #17
Drive socket # 17
Ratchet wrench
Torque wrench
Replacement: anti roll bar links – KIA Sorento JC. AUTODOC recommends:
  • Replace the stabiliser links on KIA Sorento JC in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • Please note: all work on the car – KIA Sorento JC – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    How to change Anti Roll Bar Links on KIA Sorento jc 2002 - free PDF and video manuals
    Lift the car using a jack or place it over an inspection pit.
  2. Step 2
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
    Step 3
    How to replace KIA SORENTO I (JC) 2.5 CRDi 2003 Anti Roll Bar Links - step-by-step manuals and video guides
    Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #17. Use a drive socket #17. Use a ratchet wrench.
  3. Step 4
    KIA Sorento jc 2.4 2004 Anti Roll Bar Links replacement: free workshop manuals
    Unscrew the fastener connecting the stabilizer bar with the control arm. Use a combination spanner #17. Use a drive socket #17. Use a ratchet wrench.
  4. Step 5
    Changing Anti Roll Bar Links on KIA SORENTO I (JC) 3.3 V6 4WD 2005 by yourself
    Remove the stabilizer rod.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
KIA SORENTO I (JC) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY KIA SORENTO I (JC) Anti Roll Bar Links replacement - online guide
Tips & tricks for your KIA SORENTO I (JC)
View more
  • How to change Drop links on KIA SORENTO I (JC) 3.5 V6 4WD - replacement tricks
    How to start a car after a long idle period | AUTODOC tips
  • Changing Stabilizer link KIA Sorento jc 2.5 CRDi - Replacement Tips
    DIY valve cover restoration | AUTODOC tips
  • Maintenance Hacks - KIA SORENTO I (JC) 2.4 Sway bar link replacement guide
    What causes engine misfire? | AUTODOC
  • Replace Drop link on KIA Sorento jc - free video tips
    How to choose the right engine oil for your car | AUTODOC