Important!

This replacement procedure can be used for:
FORD FUSION (JU_) 1.4 LPG, FORD FUSION (JU_) 1.3, FORD FUSION (JU_) 1.25, FORD FUSION (JU_) 1.6 TDCi, FORD FUSION (JU_) 1.4 TDCi, FORD FUSION (JU_) 1.6, FORD FUSION (JU_) 1.4 … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for FUSION (JU_) and other FORD models

Anti-roll bar link

Repair Kit, stabilizer suspension

Repair Kit, stabilizer coupling rod

Mounting, stabilizer coupling rod

        Anti-roll bar link for FORD FUSION (JU_) 1.4 Petrol (80 hp)
      
        Anti-roll bar link for FORD FUSION (JU_) 1.6 Petrol (100 hp)
      
        Anti-roll bar link for FORD FUSION (JU_) 1.4 TDCi Diesel (68 hp)
      
        Anti-roll bar link for FORD FUSION (JU_) 1.6 TDCi Diesel (90 hp)
      
        Anti-roll bar link for FORD FUSION (JU_) 1.25 Petrol (75 hp)
      
        Anti-roll bar link for FORD FUSION (JU_) 1.3 Petrol (60 hp)
      
        Anti-roll bar link for FORD FUSION (JU_) 1.4 LPG Petrol/Petroleum Gas (LPG) (80 hp)

Replacement: anti roll bar links – FORD FUSION (JU_) Tools you might need:

                        Wire brush
                      
                        WD-40 spray
                      
                        Brake cleaner 
                      
                        Copper grease 
                      
                        Combination spanner #17
                      
                        Drive socket # 17 
                      
                        Wheel impact socket #19
                      
                        Ratchet wrench
                      
                        Torque wrench
                      
                        Wheel chock

Buy tools

Replacement: anti roll bar links – FORD FUSION (JU_) Professionals recommend:

Replace the stabiliser links on FORD FUSION (JU_) in pairs.
The replacement procedure is identical for both stabiliser links on the same axle.
All work should be done with the engine stopped.

Replacement: anti roll bar links – FORD FUSION (JU_) Take the following steps:

Step 1

Secure the wheels with chocks.
Step 2

Loosen the wheel mounting bolts. Use wheel impact socket #19.
Step 3

Raise the front of the car and secure on supports.

Step 4

Unscrew the wheel bolts.

Replacement: anti roll bar links – FORD FUSION (JU_) AUTODOC recommends:
To avoid injury, hold up the wheel when unscrewing the bolts.
Step 5

Remove the wheel.
Step 6

Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
Step 7

Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #17 (2 pieces).
Step 8

Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #17. Use a ratchet wrench.
Step 9

Remove the stabilizer rod.

Replacement: anti roll bar links – FORD FUSION (JU_) AUTODOC experts recommend:
Examine stabiliser bushes. Replace them if needed.
Step 10

Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
Step 11

Ιnstall the transverse stabilizer link.
Step 12

Tighten the stabiliser link fastener. Use a drive socket #17. Use a ratchet wrench.
Step 13

Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
Step 14

Ιnstall the transverse stabilizer link.
Step 15

Tighten the stabiliser link fastener. Use a combination spanner #17 (2 pieces).
Step 16

Tighten the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #17. Use a torque wrench. Tighten it to 55 Nm torque.
Step 17

Tighten the fastener connecting the stabilizer link to the shock strut. Use a drive socket #17. Use a torque wrench. Tighten it to 48 Nm torque.
Step 18

Treat all joints of the stabiliser link. Use copper grease.
Step 19

Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
Step 20

Clean the brake disk surface. Use a brake cleaner.

AUTODOC recommends:
Replacement: anti roll bar links – FORD FUSION (JU_) After applying the spray, wait a few minutes.
Step 21

Install the wheel.

Replacement: anti roll bar links – FORD FUSION (JU_) Tip:
To avoid injury, hold up the wheel when screwing in the fastening bolts.
Step 22

Screw in the wheel bolts. Use wheel impact socket #19.
Step 23

Lower the car and working in a cross order, tighten the wheel bolts. Use wheel impact socket #19. Use a torque wrench. Tighten it to 95 nm torque.
Step 24

Remove the jacks and chocks.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

How to change front wheel bearing on FORD FUSION (JU_) – replacement guide

Free download PDF
2.67 MB
How to change rear wheel bearing on FORD FUSION (JU_) – replacement guide

Free download PDF
1.48 MB
How to change front strut mount on FORD Fusion Estate (JU2) – replacement guide

Free download PDF
3.8 MB
How to change rear strut mount on FORD Fusion Estate (JU2) – replacement guide

Free download PDF
2.66 MB
How to change track rod end on FORD FUSION (JU_) – replacement guide

Free download PDF
1.47 MB
How to change front brake pads on FORD FUSION (JU_) – replacement guide

Free download PDF
1.66 MB

How to change front anti roll bar links on FORD FUSION Saloon CD3 – replacement guide

Free download PDF
1.42 MB
How to change anti roll bar links on a car – replacement tutorial

Universal

Free download PDF
972.8 KB
How to change front anti roll bar links on Ford Focus MK2 – replacement guide

Free download PDF
1.99 MB
How to change front anti roll bar links on Ford Mondeo Mk3 saloon – replacement guide

Free download PDF
1.29 MB
How to change front anti roll bar links on Ford Focus DAW – replacement guide

Free download PDF
1.27 MB
How to change rear anti roll bar links on Ford Mondeo Mk3 saloon – replacement guide

Free download PDF
1.23 MB

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!

Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.

Scan

To download the app:

- scan the QR code
- download from App Store
- download from Google Play

What to do if your car heater isn't working | AUTODOC tips

4K views

Published on: 11/02/2021
Top 5 reasons why the suspension knocks | AUTODOC tips

1M views

Published on: 09/09/2022
How to easily repair a punctured tyre | AUTODOC tips

3K views

Published on: 25/02/2021
How to choose the right engine oil for your car | AUTODOC

8K views

Published on: 01/07/2020