Important!
This replacement procedure can be used for:
FIAT PUNTO (199) 0.9 Bifuel, FIAT PUNTO (199) 1.4 Multi Air, FIAT PUNTO (199) 1.4 (199AXB1A, 199BXB1A, 199BXB11, 199AXB11), FIAT PUNTO (199) 1.2 (199AXZ1A, 199BXZ1A), FIAT PUNTO (199) 1.4 (199AXH1A, 199BXH1A), FIAT PUNTO (199) 0.9 Twinair Turbo, FIAT PUNTO (199) 1.3 D Multijet, FIAT PUNTO (199) 1.3 D Multijet, FIAT PUNTO (199) 1.4 Turbo Multi Air, FIAT PUNTO (199) 1.3 D Multijet, FIAT PUNTO (199) 1.4 Natural Power, FIAT PUNTO (199) 0.9, FIAT PUNTO (199) 1.4 Bifuel, FIAT PUNTO (199) 0.9, FIAT PUNTO (199) 1.3 D Multijet, FIAT PUNTO (199) 1.2 (199AYL1A, 199BYL1A), FIAT PUNTO (199) 1.3 JTD Multijet (199.AYR1A, 199.BYR1A) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for PUNTO (199) and other FIAT models
How to change Anti-roll bar link on Fiat Punto mk3 199 1.2 (199AXZ1A, 199BXZ1A) – step-by-step instructions for straightforward car repair
Anti-roll bar link
How to change Repair Kit, stabilizer coupling rod on Fiat Punto mk3 199 1.2 (199AXZ1A, 199BXZ1A) – step-by-step instructions for straightforward car repair
Repair Kit, stabilizer coupling rod
Tools
Replacement: anti roll bar links – FIAT PUNTO (199). Tools you might need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #15
Combination spanner #17
Drive socket # 15
Drive socket # 17
HEX bit no.H5.
Wheel impact socket #17
Ratchet wrench
Torque wrench
Wheel chock
Replacement: anti roll bar links – FIAT PUNTO (199). Professionals recommend:
  • Replace the stabiliser links on FIAT PUNTO (199) in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • All work should be done with the engine stopped.
Replacement: anti roll bar links – FIAT PUNTO (199). Take the following steps:
  1. Step 1
    How to change Anti Roll Bar Links on Fiat Punto mk3 199 2012 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace FIAT PUNTO (199) 1.2 (199AXZ1A, 199BXZ1A) 2013 Anti Roll Bar Links - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    Fiat Punto mk3 199 1.4 Natural Power 2014 Anti Roll Bar Links replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: anti roll bar links – FIAT PUNTO (199). Tip:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Anti Roll Bar Links on FIAT PUNTO (199) 1.4 Bifuel 2015 by yourself
    Remove the wheel.
  5. Step 6
    How to remove FIAT PUNTO 1.4 (199AXB1A, 199BXB1A, 199BXB11, 199AXB11) 2016 Anti Roll Bar Links - online easy-to-follow instructions
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Anti Roll Bar Links on FIAT PUNTO (199) 2017: download PDF manuals and video instructions
    Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #15. Use HEX No.H5. Use a ratchet wrench.
  7. Step 8
    How hard is it to do yourself: Anti Roll Bar Links replacement on Fiat Punto mk3 199 1.2 (199AYL1A, 199BYL1A) 2018 - download illustrated guide
    Unscrew the fasteners connecting the stabiliser link to the stabiliser bar. Use a drive socket #15. Use a ratchet wrench.
  8. Step 9
    Need to know how to renew Anti Roll Bar Links on FIAT PUNTO 2019? This free workshop manual will help you to do it yourself
    Remove the stabilizer rod.
    Replacement: anti roll bar links – FIAT PUNTO (199). AUTODOC recommends:
    Examine stabiliser bushes. Replace them if needed.
  9. Step 10
    Changing of Anti Roll Bar Links on Fiat Punto mk3 199 2020 won't be an issue if you follow this illustrated step-by-step guide
    Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
  10. Step 11
    FIAT PUNTO 1.2 (199AXZ1A, 199BXZ1A) Anti Roll Bar Links replacement: online guides and video tutorials
    Install a new rod, tighten the fasteners. Use a combination spanner #17. Use a drive socket #17. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
FIAT PUNTO (199) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY FIAT PUNTO (199) Anti Roll Bar Links replacement - online guide
Tips & tricks for your FIAT PUNTO (199)
View more
  • How to change Drop links on FIAT PUNTO (199) 1.3 D Multijet - replacement tricks
    How to save when buying car parts
  • Changing Stabilizer link Fiat Punto mk3 199 1.2 (199AXZ1A, 199BXZ1A) - Replacement Tips
    3 things to know before buying summer tyres | AUTODOC tips
  • Maintenance Hacks - FIAT PUNTO (199) 1.4 Natural Power Sway bar link replacement guide
    DIY starter repair | AUTODOC tips
  • Replace Drop link on Fiat Punto mk3 199 - free video tips
    How to restore a damaged thread | AUTODOC tips