How to carry out replacement: Anti Roll Bar Links 1.6 TDI Audi Q2
Disclaimer
Change Audi Q2 30 TFSI Anti Roll Bar Links yourself – manuals and video tutorials

How to change front anti roll bar links on AUDI Q2 (GAB) – replacement guide

downloads: 3
Views: 17
Download your free tutorial and fix AUDI Q2 (GAB) 30 TDi problems yourself Download for free 1.22 MB Anti Roll Bar Links for Audi Q2 Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
AUDI Q2 (GAB) 1.4 TSI, AUDI Q2 (GAB) 1.0 TFSI, AUDI Q2 (GAB) 1.6 TDI, AUDI Q2 (GAB) 2.0 TDI, AUDI Q2 (GAB) 2.0 TDI quattro, AUDI Q2 (GAB) 2.0 TDI quattro, AUDI Q2 (GAB) 2.0 TFSI quattro, AUDI Q2 (GAB) 2.0 TDI, AUDI Q2 (GAB) 30 TDi, AUDI Q2 (GAB) 30 TFSI, AUDI Q2 (GAB) 35 TFSI, AUDI Q2 (GAB) 40 TFSI quattro, AUDI Q2 (GAB) SQ2 TFSI quattro, AUDI Q2 (GAB) 35 TDI quattro, AUDI Q2 (GAB) 35 TDI, AUDI Q2 (GAB) 30 TFSI, AUDI Q2 (GAB) 30 TDI, AUDI Q2 (GAB) 1.4 … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for Q2 (GAB) and other AUDI models
Alternative products
How to change Anti-roll bar link on Audi Q2 1.6 TDI – step-by-step instructions for straightforward car repair Anti-roll bar link
Tools
Replacement: anti roll bar links – AUDI Q2 (GA). Tip from AUTODOC experts:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #18
HEX bit No.H6.
Drive socket # 18
Wheel impact socket #17
Ratchet wrench
Torque wrench
Wheel chock
Buy tools
Replacement: anti roll bar links – AUDI Q2 (GA). Professionals recommend:
  • Replace the stabiliser links on AUDI Q2 (GA) in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • All work should be done with the engine stopped.
Replacement: anti roll bar links – AUDI Q2 (GA). Take the following steps:
  1. Step 1
    How to change Anti Roll Bar Links on Audi Q2 2016 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace AUDI Q2 (GAB) 1.6 TDI 2017 Anti Roll Bar Links - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    Audi Q2 1.4 TFSI 2018 Anti Roll Bar Links replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. AUDI Q2 (GA)
  4. Step 5
    Changing Anti Roll Bar Links on AUDI Q2 (GAB) 2.0 TDI quattro 2019 by yourself
    Remove the wheel.
  5. Step 6
    How to remove AUDI Q2 2.0 TDI 2020 Anti Roll Bar Links - online easy-to-follow instructions
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Anti Roll Bar Links on AUDI Q2 (GAB) 2021: download PDF manuals and video instructions
    Unscrew the fasteners connecting the stabiliser link to the stabiliser bar. Use a combination spanner #18. Use HEX No.H6. Use a ratchet wrench.
  7. Step 8
    How hard is it to do yourself: Anti Roll Bar Links replacement on Audi Q2 35 TFSI 2022 - download illustrated guide
    Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #18. Use a ratchet wrench.
  8. Step 9
    Need to know how to renew Anti Roll Bar Links on AUDI Q2 2023? This free workshop manual will help you to do it yourself
    Remove the stabilizer rod.
    Replacement: anti roll bar links – AUDI Q2 (GA). Tip:
    Examine stabiliser bushes. Replace them if needed.
  9. Step 10
    Changing of Anti Roll Bar Links on Audi Q2 2024 won't be an issue if you follow this illustrated step-by-step guide
    Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
  10. Step 11
    AUDI Q2 30 TFSI Anti Roll Bar Links replacement: online guides and video tutorials
    Ιnstall the transverse stabilizer link.
  11. Step 12
    Replacing Anti Roll Bar Links on Audi Q2 2016 1.6 TDI by yourself
    Tighten the stabiliser link fastener. Use a combination spanner #18. Use a drive socket #18. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the AUDI Q2 (GAB) model

Audi Q2 tyre size

Popular maintenance tutorials for Audi Q2

More manuals for Audi Q2

Complete guides for changing the Drop links on different AUDI Q2 models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY AUDI Q2 (GAB) Anti Roll Bar Links replacement - online guide
Tips & tricks for your AUDI Q2 (GAB)
View more
  • How to change Drop links on AUDI Q2 (GAB) 1.0 TFSI - replacement tricks
    Transform Your Engine Bay: Affordable Valve Cover Restoration with AUTODOC
    8K views
    Published on: 29/06/2023
  • Changing Stabilizer link Audi Q2 1.6 TDI - Replacement Tips
    Checking the starter without removing it | AUTODOC tips
    28K views
    Published on: 01/12/2020
  • Maintenance Hacks - AUDI Q2 (GAB) 1.4 TFSI Sway bar link replacement guide
    How to Use Sandblasting Equipment: Step-by-Step Guide | AUTODOC Tips
    5K views
    Published on: 16/05/2024
  • Replace Drop link on Audi Q2 - free video tips
    5 Essential Tips to Prepare Your Car for Winter | AUTODOC tips
    6K views
    Published on: 05/02/2024

Most commonly replaced car parts on AUDI Q2

Professional manuals for the most common AUDI models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
AUDI Q2 (GAB) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME