How to change front anti roll bar bushes on OPEL Vivaro A Platform / Chassis (X83) – replacement guide
OPEL Vivaro A Platform / Chassis (X83) 1.9 Di, OPEL Vivaro A Platform / Chassis (X83) 2.5 DTi, OPEL Vivaro A Platform / Chassis (X83) 2.0 CDTI, OPEL Vivaro A Platform / Chassis (X83) 2.0 ECOTEC, OPEL Vivaro A Platform / Chassis (X83) 2.0 CDTI, OPEL Vivaro A Platform / Chassis (X83) 2.5 CDTI, OPEL Vivaro A Platform / Chassis (X83) 2.5 CDTI, OPEL Vivaro A Platform / Chassis (X83) 2.0 16V, OPEL Vivaro A Platform / Chassis (X83) 1.9 DTI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
Anti-roll bar bush
Repair kit, anti-roll bar bush
- Replace the anti-roll bar links and bushes in pairs.
- The replacement procedure is identical for the anti-roll bar links and bushes on both sides of the same axle.
- Please note: all work on the car – OPEL VIVARO Platform/Chassis (E7) – should be done with the engine switched off.
- Step 1
Secure the wheels with chocks.
- Step 2
Loosen the fasteners of the front wheels. Use a 19 mm wheel impact socket. Use a tommy bar.
- Step 3
Raise the vehicle.
Warning!If you are using a jack, make sure the car is parked on a hard, flat surface.Make sure to additionally secure the car with jack stands.
Step 4
Unscrew the wheel fasteners.
Replacement: anti roll bar bushes – OPEL VIVARO Platform/Chassis (E7). AUTODOC recommends:To avoid injury, hold up the wheel when unscrewing the fasteners.
- Step 5
Remove the wheel.
- Step 6
Clean the fasteners of the anti-roll bar bush bracket. Use a wire brush. Use WD-40 spray.
- Step 7
Unscrew the fasteners of the anti-roll bar bush bracket. Use a 13 mm socket. Use a ratchet wrench.
- Step 8
Remove the fastening bolts.
- Step 9
Remove the anti-roll bar bush bracket.
- Step 10
Remove the anti-roll bar bush.
- Step 11
Clean the mounting seat of the anti-roll bar bush. Use a wire brush. Use an all-purpose cleaning spray.
- Step 12
Remove the other wheel.
Step 13
Follow the same steps to remove the other anti-roll bar bush bracket and the bush.
- Step 14
Install a new anti-roll bar bush on one side of the axle.
Find out which tyre and wheel sizes are compatible with the OPEL Vivaro A Platform / Chassis (X83) model
Popular maintenance tutorials for OPEL VIVARO Platform/Chassis (E7)
Free download PDF 4.31 MB
Free download PDF 2.07 MB
Free download PDF 2.22 MB
Free download PDF 1.73 MB
Free download PDF 1.95 MB
Free download PDF 1.45 MB
Complete guides for changing the Stabilizer bushes on different OPEL VIVARO models
Free download PDF 1.37 MB
Free download PDF 1.8 MB
Free download PDF 593.92 KB
Free download PDF 829.44 KB
Free download PDF 1.48 MB
Free download PDF 1.41 MB
Track expenses, manage logs, schedule replacements, and more.
Top 7 Manual Transmission Mistakes to Avoid | AUTODOC Tips
How to unlock your car without a key | AUTODOC tips
How to inspect and troubleshoot your car heater when it’s not working
Top 5 reasons why your car squeals | AUTODOC Tips
Most commonly replaced car parts on OPEL VIVARO
