Important!
This replacement procedure can be used for:
VW CRAFTER Platform/Chassis (SZ_) 2.0 TDI 4motion, VW CRAFTER Platform/Chassis (SZ_) 2.0 TDI 4motion, VW CRAFTER Platform/Chassis (SZ_) 2.0 TDI RWD, VW CRAFTER Platform/Chassis (SZ_) 2.0 TDI RWD, VW CRAFTER Platform/Chassis (SZ_) 2.0 TDI RWD, VW CRAFTER Platform/Chassis (SZ_) 2.0 TDI, VW CRAFTER Platform/Chassis (SZ_) 2.0 TDI, VW CRAFTER Platform/Chassis (SZ_) 2.0 TDI View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – ABS Sensor for CRAFTER Platform/Chassis (SZ_) and other VW models
How to change ABS sensor on VW Crafter Platform 2.0 TDI – step-by-step instructions for straightforward car repair
ABS sensor
How to change ABS sensor ring on VW Crafter Platform 2.0 TDI – step-by-step instructions for straightforward car repair
ABS sensor ring
Tools
Replacement: ABS sensor – VW CRAFTER Platform/Chassis (SZ_). List of the tools you'll need:
Wire brush
Nylon cleaning brush
WD-40 spray
Brake cleaner
Electronic spray
Multipurpose grease
Copper grease
Torque wrench
HEX bit No.H5
Wheel impact socket #17
Ratchet wrench
Flat screwdriver
Wheel chock
Replacement: ABS sensor – VW CRAFTER Platform/Chassis (SZ_). AUTODOC experts recommend:
  • All work should be done with the engine stopped.
Replacement: ABS sensor – VW CRAFTER Platform/Chassis (SZ_). Use the following procedure:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change ABS Sensor on VW Crafter Platform 2016 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  2. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    How to replace VW CRAFTER Platform/Chassis (SZ_) 2.0 TDI 2017 ABS Sensor - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. VW CRAFTER Platform/Chassis (SZ_)
  3. Step 5
    VW Crafter Platform 2.0 TDI RWD 2018 ABS Sensor replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing ABS Sensor on VW CRAFTER Platform/Chassis (SZ_) 2.0 TDI 2019 by yourself
    Detach the ABS sensor connector.
  5. Step 7
    How to remove VW CRAFTER 2.0 TDI RWD 2020 ABS Sensor - online easy-to-follow instructions
    Clean the ABS sensor fastener. Use a wire brush. Use WD-40 spray.
  6. Step 8
    How to replace ABS Sensor on VW CRAFTER Platform/Chassis (SZ_) 2021: download PDF manuals and video instructions
    Unscrew the ABS sensor fastener. Use HEX No.H5. Use a ratchet wrench.
  7. Step 9
    How hard is it to do yourself: ABS Sensor replacement on VW Crafter Platform 2.0 TDI 2022 - download illustrated guide
    Disconnect the ABS sensor.
  8. Step 10
    Need to know how to renew ABS Sensor on VW CRAFTER 2023? This free workshop manual will help you to do it yourself
    Clean the ABS sensor mounting seat. Use a wire brush. Use WD-40 spray.
  9. Step 11
    Changing of ABS Sensor on VW Crafter Platform 2024 won't be an issue if you follow this illustrated step-by-step guide
    Treat the ABS sensor fastener. Use a multipurpose grease. Use a flat screwdriver.
  10. Step 12
    VW CRAFTER 2.0 TDI 4motion ABS Sensor replacement: online guides and video tutorials
    Connect the ABS sensor.
  11. Step 13
    Replacing ABS Sensor on VW Crafter Platform 2017 2.0 TDI by yourself
    Tighten the fastener that connects the ABS sensor to the steering knuckle. Use HEX No.H5. Use a torque wrench. Tighten it to 7 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
VW CRAFTER Platform/Chassis (SZ_) ABS Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY VW CRAFTER Platform/Chassis (SZ_) ABS Sensor replacement - online guide
Tips & tricks for your VW CRAFTER Platform/Chassis (SZ_)
View more
  • How to change Wheel speed sensor on VW CRAFTER Platform/Chassis (SZ_) 2.0 TDI 4motion - replacement tricks
    How to restore a steering wheel | AUTODOC tips
  • Changing ABS wheel speed sensor VW Crafter Platform 2.0 TDI - Replacement Tips
    4 reasons why your CHECK ENGINE light is on | AUTODOC tips
  • Maintenance Hacks - VW CRAFTER Platform/Chassis (SZ_) 2.0 TDI RWD Anti lock brake sensor replacement guide
    Causes of a worn car boot damper | AUTODOC
  • Replace Wheel speed sensor on VW Crafter Platform - free video tips
    What to check when buying a used car | AUTODOC tips