
Disclaimer
How to change front ABS sensor on RENAULT Master II Platform/Chassis – replacement guide
downloads:
0
Views:
2
Important!
This replacement procedure can be used for:
RENAULT MASTER II Platform/Chassis (ED/HD/UD) 2.5 dCi, RENAULT MASTER II Platform/Chassis (ED/HD/UD) 2.2 dCI, RENAULT MASTER II Platform/Chassis (ED/HD/UD) 2.8 dTI, RENAULT MASTER II Platform/Chassis (ED/HD/UD) 2.5 D … View more
The steps may slightly vary depending on the car design.
RENAULT MASTER II Platform/Chassis (ED/HD/UD) 2.5 dCi, RENAULT MASTER II Platform/Chassis (ED/HD/UD) 2.2 dCI, RENAULT MASTER II Platform/Chassis (ED/HD/UD) 2.8 dTI, RENAULT MASTER II Platform/Chassis (ED/HD/UD) 2.5 D … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – ABS Sensor for MASTER II Platform/Chassis (ED/HD/UD) and other RENAULT models
Alternative products

Wire brush
WD-40 spray
Electronic spray
Ceramic grease
ABS sensor grease
Torque wrench
10 mm socket
24 mm wheel impact socket
Ratchet wrench or power tool for removal/installation of threaded fasteners
Tommy bar
Car lift or jack with jack stands, and wheel chocks
Replacement: ABS sensor – RENAULT MASTER II Platform/Chassis (ED/HD/UD). AUTODOC recommends:
- All the work should be carried out with the engine switched off.
Replacement: ABS sensor – RENAULT MASTER II Platform/Chassis (ED/HD/UD). Use the following procedure:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel fasteners. Use a 24 mm wheel impact socket. Use a tommy bar. - Step 3
Raise the vehicle.Replacement: ABS sensor – RENAULT MASTER II Platform/Chassis (ED/HD/UD). AUTODOC experts recommend:If you are using a jack, make sure the car is parked on a hard, flat surface.Make sure to additionally secure the car with jack stands. - Step 4
Unscrew the wheel fasteners.Caution!To avoid injury, hold up the wheel when unscrewing the fasteners. - Step 5
Remove the wheel. - Step 6
Clean the ABS sensor fastener. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the ABS sensor fastener. Use a 10 mm socket. Use a ratchet wrench. - Step 8
Remove the fastening bolt. - Step 9
Remove the ABS sensor. - Step 10
Detach the ABS sensor wiring. - Step 11
Detach the ABS sensor connector. - Step 12
Treat the ABS sensor connector. Use an electronic spray. - Step 13
Attach the connector of the new ABS sensor.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Master II Platform/Chassis model
Popular maintenance tutorials for Renault Master 2 Platform
Complete guides for changing the Wheel speed sensor on different RENAULT MASTER models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT MASTER II Platform/Chassis (ED/HD/UD)
View more
#DIY Wheel Rim Restoration: Revive Scratches and Chips Easily!
Three ways to change oil without a lift
How to Make a DIY Foam Sprayer | AUTODOC tips
How to get your motorcycle ready for spring
Most commonly replaced car parts on RENAULT MASTER
Time to replace parts? Get even better deals in our Shop app.

SCAN ME

































