How to change rear windshield wipers on Fiat Bravo 2 – replacement guide
downloads:
1
Views:
138
0
Users voted – 0
Recommended replacement interval for the part category Rear wiper blade : 12month
Important!
This replacement procedure can be used for:
FIAT BRAVO II (198) 1.6 D Multijet (198AXH1B),
FIAT BRAVO II (198) 1.4 16V (198AXS1B),
FIAT BRAVO II (198) 1.6 D Multijet (198AXM1B),
FIAT BRAVO II (198) 1.9 D Multijet (198AXD1A),
FIAT BRAVO II (198) 1.4 LPG (198AXA1B),
FIAT BRAVO II (198) 2.0 D Multijet (198AXPIB),
FIAT BRAVO II (198) 1.9 D Multijet (198AXB1A),
FIAT BRAVO II (198) 1.9 D Multijet (198AXC1B),
FIAT BRAVO II (198) 1.4 (198AXA1B),
FIAT BRAVO II (198) 1.4 T-Jet (198AXG1B),
FIAT BRAVO II (198) 1.4 T-Jet (198AXF1B),
FIAT BRAVO II (198) 1.6 D Multijet (198AXL1B),
FIAT BRAVO II (198) 1.9 D Multijet (198AXE1A),
FIAT BRAVO II (198) 2.0 D Multijet (198AXN1B)
…
View more
The steps may slightly vary depending on the car design.
How to change wipers blades / window wipers FIAT BRAVO 2 (198) [TUTORIAL AUTODOC]
All the parts you need to replace – Wiper Blades for BRAVO II (198) and other FIAT models
Rear wiper blade for Bravo II Hatchback (198) Diesel (150 hp)
Rear wiper blade for Bravo II Hatchback (198) Petrol (90 hp)
Rear wiper blade for Bravo II Hatchback (198) Petrol (120 hp)
AUTODOC recommends:
Please note: all work on the car – Fiat Bravo 2 – should be done with the engine switched off.
Carry out replacement in the following order:
Step 1
Prepare the new windscreen wipers.
Step 2
Pull the wiper arm away from the glass surface until it stops.
Step 3
Turn the wiper blade by ninety degrees. Remove the blade from the wiper arm.
Replacement: windshield wipers – Fiat Bravo 2. Professionals recommend:
When replacing the wiper blade, take caution to prevent the spring-loaded wiper arm from hitting the glass.
Step 4
Install the new wiper blade and carefully press the wiper arm down to the glass.
Replacement: windshield wipers – Fiat Bravo 2. AUTODOC recommends:
Don't touch the wiper blade at the working rubber edge to prevent damage to the graphite coating. Ensure that the blade rubber strip fits tightly to the glass along the entire length.
Step 5
Switch on the ignition.
Step 6
After installation check the wipers performance.
Comments –
1
@user_857516
18.05.2022 08:04
Member
You mean turn back wards 90° , i will try again
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?
Find out which tyre and wheel sizes are compatible with the FIAT Bravo II Hatchback (198) model.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your FIAT BRAVO II (198)
View more
DIY brake caliper restoration | AUTODOC tips
TOP 5 mistakes during DIY oil change | AUTODOC tips
Things you should never do with your manual transmission | AUTODOC tips
How to prevent car windows from fogging up | AUTODOC tips