Important!
This replacement procedure can be used for:
FIAT BRAVO II (198) 1.6 D Multijet

The steps may slightly vary depending on the car design.

How to change rear springs / rear coil springs on FIAT BRAVO 2 (198) [TUTORIAL AUTODOC]

Replacement: coil springs – Fiat Bravo 2. Tools you might need:
Replacement: coil springs – Fiat Bravo 2. Tools you might need:
Wire brush
WD-40 spray
Drive socket # 19
Wheel impact socket #17
Torque wrench
Tap wrench
Crow bar
Hydraulic transmission jack
Wheel chock
All the parts you need to replace – Springs for BRAVO II (198) and other FIAT models
How to change Coil Spring on FIAT BRAVO II (198) 1.9 D Multijet – step-by-step instructions for straightforward car repair
Coil Spring
How to change Coil Spring on FIAT BRAVO II (198) 1.6 D Multijet – tips for proper car maintenance
FIAT BRAVO II (198) 1.6 D Multijet
Replacement: coil springs – Fiat Bravo 2. Professionals recommend:
  • Both coil springs of the rear suspension should be replaced simultaneously.
  • The replacement procedure is identical for the left and right coil springs of the rear suspension.
  • All work should be done with the engine stopped.
Replacement: coil springs – Fiat Bravo 2. Take the following steps:
  1. How to change Springs on FIAT BRAVO II (198) 2006 - free PDF and video manuals
    Step 1
    Secure the wheels with chocks.
  2. How to replace FIAT BRAVO II (198) 1.9 D Multijet 2007 Springs - step-by-step manuals and video guides
    Step 2
    Loosen the wheel mounting bolts.Use wheel impact socket #17.
  3. FIAT BRAVO II (198) 1.6 D Multijet 2008 Springs replacement: free workshop manuals
    Step 3
    Raise the rear of the car and secure on supports.
  4. Changing Springs on FIAT BRAVO II (198) 1.4 T-Jet 2009 by yourself
    Step 4
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. Fiat Bravo 2
  5. How to remove FIAT BRAVA 1.4 LPG 2010 Springs - online easy-to-follow instructions
    Step 5
    Remove the wheel.
  6. How to replace Springs on FIAT BRAVO II (198) 2011: download PDF manuals and video instructions
    Step 6
    Support the rear suspension beam. Use a hydraulic transmission jack.
  7. How hard is it to do yourself: Springs replacement on FIAT BRAVO II (198) 1.9 D Multijet 2012 - download illustrated guide
    Step 7
    Clean the shock absorber fasteners.Use a wire brush.Use WD-40 spray.
  8. Need to know how to renew Springs on FIAT BRAVA ? This free workshop manual will help you to do it yourself
    Step 8
    Unscrew the lower fastener of the shock absorber.Use a drive socket #19.Use a tap wrench.
  9. Changing of Springs on FIAT BRAVO II (198) 2014 won't be an issue if you follow this illustrated step-by-step guide
    Step 9
    Remove the mounting from under the rear axle beam.
    AUTODOC recommends:
    Replacement: coil springs – Fiat Bravo 2. Lower the transmission jack smoothly, without jerks, to avoid damaging components and mechanisms.
  10. FIAT BRAVA 1.4 Springs replacement: online guides and video tutorials
    Step 10
    Support the rear suspension beam. Use a hydraulic transmission jack.
  11. Replacing Springs on FIAT BRAVO II (198) 2016 1.9 D Multijet by yourself
    Step 11
    Unscrew the lower fastener of the shock absorber.Use a drive socket #19.Use a tap wrench.
  12. BRAVO II (198) 1.4 LPG 2017 Springs DIY replacement workshop manual
    Step 12
    Lower the hydraulic transmission jack by 10-15 cm.
    AUTODOC recommends:
    Fiat Bravo 2 – Do not lower the transmission jack sharply to avoid damaging components and mechanisms of the car.
  13. How to change Springs on FIAT BRAVO II (198) 2018 - tips and tricks
    Step 13
    Remove the spring.
  14. Step-by-step recommendations for DIY replacement FIAT BRAVO II (198) 2019 1.4 LPG Springs
    Step 14
    Inspect the rubber mounts of the suspension spring. Replace if necessary.
    Step 15
    Clean the coil spring mounting seats.Use a wire brush.Use WD-40 spray.
  15. DIY replacement of Springs on FIAT BRAVO II (198) 1.4 2020 is not an issue anymore with our step-by-step tutorial
    Step 16
    Pull down the rear suspension beam.Use a crowbar.
  16. How to change Springs on FIAT BRAVO II (198) 2006 - free PDF and video manuals
    Step 17
    Install the coil spring together with the rubber mounts into the mounting seats.
  17. How to replace FIAT BRAVO II (198) 1.9 D Multijet 2007 Springs - step-by-step manuals and video guides
    Step 18
    Support the rear suspension beam. Use a hydraulic transmission jack.
  18. FIAT BRAVO II (198) 1.6 D Multijet 2008 Springs replacement: free workshop manuals
    Step 19
    Screw in the lower fastener of the shock absorber. Use a drive socket #19.
  19. Changing Springs on FIAT BRAVO II (198) 1.4 T-Jet 2009 by yourself
    Step 20
    Remove the mounting from under the rear axle beam.
    AUTODOC recommends:
    Replacement: coil springs – Fiat Bravo 2. Lower the transmission jack smoothly, without jerks, to avoid damaging components and mechanisms.
  20. How to remove FIAT BRAVA 1.4 LPG 2010 Springs - online easy-to-follow instructions
    Step 21
    Support the rear suspension beam. Use a hydraulic transmission jack.
  21. How to replace Springs on FIAT BRAVO II (198) 2011: download PDF manuals and video instructions
    Step 22
    Tighten the lower fastener of the shock absorber. Use a drive socket #19.Use a torque wrench.Tighten it to 85 Nm torque.
  22. How hard is it to do yourself: Springs replacement on FIAT BRAVO II (198) 1.9 D Multijet 2012 - download illustrated guide
    Step 23
    Install the wheel.
    AUTODOC recommends:
    Important! Hold the wheel while screwing in the fastening bolts. Fiat Bravo 2
  23. Need to know how to renew Springs on FIAT BRAVA ? This free workshop manual will help you to do it yourself
    Step 24
    Screw in the wheel bolts.Use wheel impact socket #17.
  24. Changing of Springs on FIAT BRAVO II (198) 2014 won't be an issue if you follow this illustrated step-by-step guide
    Step 25
    Lower the car and working in a cross order, tighten the wheel bolts.Use a torque wrench.Tighten it to 110 Nm torque.
  25. FIAT BRAVA 1.4 Springs replacement: online guides and video tutorials
    Step 26
    Remove the jacks and chocks.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
FIAT BRAVO II (198) Springs replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY FIAT BRAVO II (198) Springs replacement - online guide
Tips & tricks for your FIAT BRAVO II (198)
View more
  • How to change Suspension springs on FIAT BRAVO II (198) 1.4 - replacement tricks
    How to transport a Christmas tree? 🎄
  • Changing Coil springs FIAT BRAVO II (198) 1.9 D Multijet - Replacement Tips
    How do I store summer and winter tyres? | AUTODOC's tips
  • Maintenance Hacks - FIAT BRAVO II (198) 1.6 D Multijet Coil spring replacement guide
    How to top up engine oil yourself | What happens if you underfill or overfill the oil? | AUTODOC
  • Replace Suspension spring on FIAT BRAVO II (198) - free video tips
    Testing wheel rim cleaners: K2, SONAX, SHELL, MOTUL | AUTODOC