Disclaimer
How to change distributor rotor on VW Jetta Mk2 (19E, 1G2, 165) – replacement guide
downloads:
7
Views:
125
Important!
This replacement procedure can be used for:
VW Jetta II (19E, 1G2, 165) 1.3, VW Jetta II (19E, 1G2, 165) 1.6, VW Jetta II (19E, 1G2, 165) 1.6, VW Jetta II (19E, 1G2, 165) 1.6, VW Jetta II (19E, 1G2, 165) 1.8, VW Jetta II (19E, 1G2, 165) 1.8 Cat, VW Jetta II (19E, 1G2, 165) 1.8 Cat, VW Jetta II (19E, 1G2, 165) 1.8, VW Jetta II (19E, 1G2, 165) 1.8 16V, VW Jetta II (19E, 1G2, 165) 1.8 16V, VW Jetta II (19E, 1G2, 165) 1.8 Syncro, VW Jetta II (19E, 1G2, 165) 1.3 Cat, VW Jetta II (19E, 1G2, 165) 1.8, VW Jetta II (19E, 1G2, 165) 1.8 … View more
The steps may slightly vary depending on the car design.
VW Jetta II (19E, 1G2, 165) 1.3, VW Jetta II (19E, 1G2, 165) 1.6, VW Jetta II (19E, 1G2, 165) 1.6, VW Jetta II (19E, 1G2, 165) 1.6, VW Jetta II (19E, 1G2, 165) 1.8, VW Jetta II (19E, 1G2, 165) 1.8 Cat, VW Jetta II (19E, 1G2, 165) 1.8 Cat, VW Jetta II (19E, 1G2, 165) 1.8, VW Jetta II (19E, 1G2, 165) 1.8 16V, VW Jetta II (19E, 1G2, 165) 1.8 16V, VW Jetta II (19E, 1G2, 165) 1.8 Syncro, VW Jetta II (19E, 1G2, 165) 1.3 Cat, VW Jetta II (19E, 1G2, 165) 1.8, VW Jetta II (19E, 1G2, 165) 1.8 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Distributor Rotor for Jetta II (19E, 1G2, 165) and other VW models
Alternative products

Electronic spray
Crow bar
Fender cover
Replacement: distributor rotor – VW JETTA II (19E, 1G2, 165). AUTODOC experts recommend:
- Follow the terms, recommendations and requirements of the part operation provided by the manufacturer.
- Thoroughly inspect the ignition distributor assembly. Replace any worn parts.
- Please note: all work on the car – VW JETTA II (19E, 1G2, 165) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Make marks on the distributor cap to indicate the installation order of the spark plug wires. - Step 4
Disconnect the spark plug wires from the distributor cap.Replacement: distributor rotor – VW JETTA II (19E, 1G2, 165). Tip from AUTODOC:Be careful to avoid damaging spark plug wires. - Step 5
Release the distributor cap clips. Use a crowbar. - Step 6
Remove the distributor cap.AUTODOC recommends:Replacement: distributor rotor – VW JETTA II (19E, 1G2, 165). Do not use excessive force when removing the part as this may damage it. - Step 7
Remove the ignition distributor rotor.Replacement: distributor rotor – VW JETTA II (19E, 1G2, 165). Professionals recommend:Do not apply excessive force when removing the part. Otherwise you may damage it. - Step 8
Install a new ignition distributor rotor.AUTODOC recommends:When installing, do not use excessive force to avoid damage to the part. - Step 9
Install the distributor cap.AUTODOC recommends:When installing, do not use excessive force to avoid damage to the part.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VW Jetta Mk2 (19E, 1G2, 165) model
Popular maintenance tutorials for VW Jetta 2
Complete guides for changing the Ignition distributor rotor on different VW JETTA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VW Jetta II (19E, 1G2, 165)
View more
How to Swap an M50 Engine in a BMW E30 Turbo | AUTODOC Project
Can You Hear Your Brakes Squeaking? Learn the Causes and DIY Solutions! | AUTODOC Tips
How to Polish Your Car Yourself and Save Money on Garage Services | AUTODOC tips
Top 5 Mistakes to Avoid for Safe Engine Bay Repairs | AUTODOC Tips
Most commonly replaced car parts on VW JETTA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME























