Important!
This replacement procedure can be used for:
VW GOLF III (1H1) 1.8, VW GOLF III (1H1) 1.8, VW GOLF III (1H1) 1.8 Syncro (1HX1), VW GOLF III (1H1) 2.0, VW GOLF III (1H1) 1.6 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Tools
Replacement: distributor cap – VW GOLF III (1H1). Tools you need:
Electronic spray
Crow bar
Fender cover
Replacement: distributor cap – VW GOLF III (1H1). Tip from AUTODOC experts:
  • Follow the terms, recommendations and requirements of the part operation provided by the manufacturer.
  • Thoroughly inspect the ignition distributor assembly. Replace any worn parts.
  • All work should be done with the engine stopped.
Replacement: distributor cap – VW GOLF III (1H1). Use the following procedure:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Distributor Cap on Golf 3 1991 - free PDF and video manuals
    Make marks on the distributor cap to indicate the installation order of the spark plug wires.
  2. Step 4
    How to replace VW GOLF III (1H1) 2.8 VR6 1992 Distributor Cap - step-by-step manuals and video guides
    Disconnect the spark plug wires from the distributor cap.
    Replacement: distributor cap – VW GOLF III (1H1). Tip from AUTODOC experts:
    Be careful to avoid damaging spark plug wires.
  3. Step 5
    Golf 3 2.0 1993 Distributor Cap replacement: free workshop manuals
    Release the distributor cap clips. Use a crowbar.
  4. Step 6
    Changing Distributor Cap on VW GOLF III (1H1) 1.9 TDI 1994 by yourself
    Remove the distributor cap.
    AUTODOC recommends:
    Replacement: distributor cap – VW GOLF III (1H1). Do not use excessive force when removing the part as this may damage it.
  5. Step 7
    How to remove VW GOLF 1.6 1995 Distributor Cap - online easy-to-follow instructions
    Install a new distributor cap.
    AUTODOC recommends:
    Replacement: distributor cap – VW GOLF III (1H1). Do not use excessive force during installation. This may damage the part.
  6. Step 8
    How to replace Distributor Cap on VW GOLF III (1H1) 1996: download PDF manuals and video instructions
    Fasten the distributor cap clips.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the VW Golf III Hatchback (1H1) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
VW GOLF III (1H1) Distributor Cap replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY VW GOLF III (1H1) Distributor Cap replacement - online guide
Tips & tricks for your VW GOLF III (1H1)
View more
  • How to change Ignition distributor cap on VW GOLF III (1H1) 1.8 - replacement tricks
    Things you should never do with an automatic transmission | AUTODOC tips
  • Changing Ignition distributor cap Golf 3 2.8 VR6 - Replacement Tips
    3 things that cause engine damage | AUTODOC tips
  • Maintenance Hacks - VW GOLF III (1H1) 2.0 Ignition distributor cap replacement guide
    How to remove rust | AUTODOC tips
  • Replace Ignition distributor cap on Golf 3 - free video tips
    TOP 5 mistakes when replacing shock absorbers | AUTODOC tips