Disclaimer
How to change camshaft position sensor on NISSAN X-Trail (T31) – replacement guide
downloads:
1
Views:
16
Important!
This replacement procedure can be used for:
NISSAN X-TRAIL (T31) 2.0 dCi 4x4, NISSAN X-TRAIL (T31) 2.0 dCi 4x4, NISSAN X-TRAIL (T31) 2.0 dCi 4x4, NISSAN X-TRAIL (T31) 2.0 dCi … View more
The steps may slightly vary depending on the car design.
NISSAN X-TRAIL (T31) 2.0 dCi 4x4, NISSAN X-TRAIL (T31) 2.0 dCi 4x4, NISSAN X-TRAIL (T31) 2.0 dCi 4x4, NISSAN X-TRAIL (T31) 2.0 dCi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Camshaft Sensor for X-TRAIL (T31) and other NISSAN models
Alternative products
Camshaft position sensor
Wire brush
All-purpose cleaning spray
Electronic spray
Torque wrench
10 mm socket
Ratchet wrench
Mounting lever
Paper towels
Replacement: camshaft position sensor – NISSAN X-TRAIL (T31). AUTODOC recommends:
- All the work should be carried out with the ignition switched off.
Replacement: camshaft position sensor – NISSAN X-TRAIL (T31). Take the following steps:
- Step 1Lift the vehicle using a vehicle lift or place it over an inspection pit.Step 2
Clean the fastener of the camshaft position sensor. Use a wire brush. Use an all-purpose cleaning spray. - Step 3
Detach the connector of the camshaft position sensor. - Step 4
Unscrew the fastener of the camshaft position sensor. Use a 10 mm socket. Use a ratchet wrench. - Step 5
Remove the fastening bolt. - Step 6
Remove the camshaft position sensor. - Step 7
Plug the sensor mounting hole with a paper towel to prevent dust and dirt from getting in. - Step 8
Clean the mounting seat of the camshaft position sensor. Use an all-purpose cleaning spray. - Step 9
Treat the connector of the camshaft position sensor. Use an electronic spray.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the NISSAN X-Trail (T31) model
Popular maintenance tutorials for Nissan X-Trail T31
Free download PDF
2.02 MB
Free download PDF2.82 MB
Free download PDF1.44 MB
Free download PDF1.72 MB
Free download PDF1.77 MB
Free download PDF2.13 MB
Complete guides for changing the Camshaft position sensor on different NISSAN X-TRAIL models
Free download PDF983.04 KB
Free download PDF983.04 KB
Free download PDF983.04 KB
Free download PDF983.04 KB
Free download PDF983.04 KB
Free download PDF983.04 KB
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your NISSAN X-TRAIL (T31)
View more
Preventing Engine Failure: Head Gasket Inspection Tutorial | AUTODOC
How to tighten cylinder head bolts
Drive with Care: 8 Common Bad Driving Habits Explained | AUTODOC
5 tools that make car repair incredibly simple | AUTODOC tips
Most commonly replaced car parts on NISSAN X-TRAIL
Time to replace parts? Get even better deals in our Shop app.
SCAN ME