Disclaimer
How to change air filter on VAUXHALL Vivaro Platform / Chassis (X83) – replacement guide
downloads:
0
Views:
1
Recommended replacement interval for the part category Air filter : 12 month / 15000 km
Important!
This replacement procedure can be used for:
VAUXHALL Vivaro Platform / Chassis (X83) 2.5 CDTI, VAUXHALL Vivaro Platform / Chassis (X83) 2.5 CDTI, VAUXHALL Vivaro Platform / Chassis (X83) 2.0 CDTI, VAUXHALL Vivaro Platform / Chassis (X83) 2.0 CDTI … View more
The steps may slightly vary depending on the car design.
VAUXHALL Vivaro Platform / Chassis (X83) 2.5 CDTI, VAUXHALL Vivaro Platform / Chassis (X83) 2.5 CDTI, VAUXHALL Vivaro Platform / Chassis (X83) 2.0 CDTI, VAUXHALL Vivaro Platform / Chassis (X83) 2.0 CDTI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Air Filter for Vivaro Platform / Chassis (X83) and other VAUXHALL models
Alternative products
Air filter
Electronic spray
7 mm socket
T25 Torx screwdriver
Ratchet wrench
Microfibre towel
Fender cover
Replacement: air filter – VAUXHALL VIVARO Platform/Chassis (E7). Professionals recommend:
- Follow the maintenance intervals, recommendations, and requirements for using the part as specified by the manufacturer.
- All the work should be carried out with the ignition switched off.
Replacement: air filter – VAUXHALL VIVARO Platform/Chassis (E7). Take the following steps:
- Step 1Open the bonnet.Step 2Use a fender protection cover to avoid damaging the paintwork and plastic parts of the car.Step 3
Loosen the clamp of the air intake hose. Use a 7 mm socket. Use a ratchet wrench. - Step 4
Detach the air intake hose from the MAF sensor. - Step 5
Plug the air intake hose with a microfibre towel to prevent dust and dirt from getting into the system. - Step 6
Detach the connector from the MAF sensor. - Step 7
Unscrew the air filter cover fasteners. Use a T25 Torx screwdriver. - Step 8
Remove the air filter cover. - Step 9
Remove the filter element from the filter housing. - Step 10
Clean the air filter cover and housing. - Step 11
Insert a new filter element into the filter housing.Replacement: air filter – VAUXHALL VIVARO Platform/Chassis (E7). AUTODOC recommends:During installation, make sure to prevent dust and dirt from getting into the air filter housing.Take care to only use quality filters.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VAUXHALL Vivaro Platform / Chassis (X83) model
Popular maintenance tutorials for VAUXHALL VIVARO Platform/Chassis (E7)
Free download PDF 1.6 MB
Free download PDF 583.68 KB
Free download PDF 1.31 MB
Free download PDF 4.31 MB
Free download PDF 1.25 MB
Free download PDF 634.88 KB
Complete guides for changing the Air filters on different VAUXHALL VIVARO models
Free download PDF 1.19 MB
Free download PDF 1.19 MB
Free download PDF 1.5 MB
Free download PDF 1003.52 KB
Free download PDF 1003.52 KB
Free download PDF 1003.52 KB
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VAUXHALL Vivaro Platform / Chassis (X83)
View more
Save Money on Fuel with These Easy Tips | AUTODOC
3 essential tips for choosing summer tyres | Get ready for warmer weather
How to identify a faulty CV joint
Top 5 reasons why your car squeals | AUTODOC Tips
Most commonly replaced car parts on VAUXHALL VIVARO
Time to replace parts? Get even better deals in our Shop app.
SCAN ME