How to change air filter on TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) – replacement guide
downloads:
4
Views:
29
0
Users voted – 0
Recommended replacement interval for the part category Air filter : 2year / 15000km
Important!
This replacement procedure can be used for:
TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 3.0 D-4D (KDJ155_, KDJ150_),
TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 2.7 (TRJ150_, TRJ155_),
TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 3.0 D-4D (KDJ150_, KDJ150, KDJ155),
TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 3.0 TDi (KDJ150_)
…
View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Air Filter for LAND CRUISER 150 (KDJ15_, GRJ15_) and other TOYOTA models
Replacement: air filter – TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_). Do not ignore the maintenance schedule, recommendations, and requirements specified by the manufacturer on the use of the car part.
All work should be done with the engine stopped.
Replacement: air filter – TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_). Use the following procedure:
Step 1
Open the bonnet.
Step 2
Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
Step 3
Release the air filter cover clips.
Step 4
Slightly raise the cover of the air filter housing.
Step 5
Remove the filter element from the filter housing.
Step 6
Cover the air intake hose with a microfibre towel to prevent dust and dirt from getting into the system.
Step 7
Clean the air filter cover and housing.
Replacement: air filter – TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_). AUTODOC experts recommend:
Before cleaning the air filter cover and housing, cover the air duct parts, mass airflow sensor (if available), throttle valve with a clean cloth.
Step 8
Insert a new filter element into the filter housing. Make sure that the filter edge fits tight to the housing.
AUTODOC recommends:
Replacement: air filter – TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_). Be sure to position the filtering element correctly. Avoid misalignment.Take care to only use quality filters.During installation, make sure to prevent dust and dirt from getting into the air filter housing.
Step 9
Reinstall the air filter cover. Fasten it.
Step 10
Press the air filter cover clips into place.
Step 11
Remove the fender protection cover.
Step 12
Close the hood.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Popular maintenance tutorials for Toyota Land Cruiser 150
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_)
View more
How to repair a chipped or cracked windscreen | AUTODOC tips
How to shine your tyres | AUTODOC tips
How to save when buying car parts
How to detect vacuum leaks using a smoke machine | AUTODOC
Most commonly replaced car parts on TOYOTA LAND CRUISER