AUTODOC FORUM / Car discussions by make / MERCEDES-BENZ / Rear /lower engine mount

Back to topics

Rear /lower engine mount
MERCEDES-BENZ V-Class (W638/2)

  • CHEVROLET SPARK (M300) 1.2
    @user_190823 Dec 17, 2020
    Member
    HI has anyone on here replaced one of these? It looks quite a simple process ie  veh up on axle stands support engine on hydraulic jack. ..remove bolts then arm and press old out new in. Is there anything that I need to be aware of or that I am missing out?
    I know that it’s a 20 year old vehicle but I have converted it into a camper and saved the 20k people spend on a VW.
    Any help appreciated.
    Reply

    Started

    17.12.20

    Latest reply

    21.12.20

    Replies

    2

    Views

    472

  • CHEVROLET SPARK (M300) 1.2
    @user_190823 Dec 17, 2020
    Member
    It’s a 638 vito by the way
    I dont know if that has come across in my posting or not.
    Reply
  • @Groy1944 Dec 21, 2020
    Member
    At the moment of removing the support, the engine must be clearly secured from below with a jack, and preferably from above with a chain.
    Then just unscrew the support, knock out the bolt.
    The engine at this moment should not move much, otherwise, hoses or wires from the engine may be damaged.
    Reply

Only registered users may reply to topics and posts

Install the AUTODOC CLUB app!

Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.

Autodoc CLUB app qr-code
Scan

To download the app:

Autodoc CLUB App icon