Engine swap CITROËN C3 III Box Body / Hatchback (SX, SY)

If there is no crane, but there is a car lift, then the engine can be removed through the bottom. remove the subframe, tear apart everything except the engine and gearbox mounts, place a small strong table under the engine and gearbox, then lower the car so that the engine rests on this table, unscrew the gearbox and engine mounting mounts and lift the body - the engine will remain on the table.

@moto x3m I'd recommend consulting with a professional mechanic or engineer who has experience with such swaps to determine feasibility and potential challenges.

@moto x3m
including sports, music, and gaming, converge to have an exceptional time.

How is everything going?

Is it completed?

Sounds like a challenging project. good luck with it!

The engine can be extracted through the bottom if there is a car lift but no crane. Firstly, remove the subframe. Secondly, disassemble all components except for the engine and gearbox mounts. Third, position a small, sturdy table beneath the engine moto x3m and gearbox. Fourth, lower the vehicle so that the engine is resting on the table. Fifth, unscrew the gearbox and engine mounting mounts and lift the body. The engine will remain on the table.