AUTODOC FORUM / Car discussions by make / NISSAN / Change NISSAN NP300 PICKUP Blower Motor

Back to topics

Change NISSAN NP300 PICKUP Blower Motor
NISSAN NP300 Pickup (D22)

  • @user_206434 Jan 06, 2021
    Member
    How to clean out the Heater blower fan?
    Steps to follow in dismantling the dashboard to reach the heater fan. I want to clean the fan from possible Rodent droppings and nesting material. There are quite a vibration in the vehicle when the fan are in motion and increases when I speed it up?
    Reply

    Started

    06.01.21

    Latest reply

    07.01.21

    Replies

    1

    Views

    450

  • @Prond1952 Jan 07, 2021
    Member
    To get to the unit, you need to remove the pedal block and start disassembling the stove body from the side of the cabin filter. 
    This procedure is quite laborious and requires certain skills. 
    Therefore, it is better to trust those people who have experience in such things.
    First, remove the dashboard.
    Next, remove the steering column beam.
    Then remove the heater and the cooling unit.
    Remove the wiring fastening clip from the upper chamber of the intake flap.
    Then disconnect the connector from the damper motor – B.
    Further from the heater body and the cooling unit, unscrew the fastening screws – A of the lower chamber of the intake flap.
    Then remove the air conditioner engine.
    The fan must be moved to the right and the locating pin and elbow removed.
    Reply

Only registered users may reply to topics and posts

Install the AUTODOC CLUB app!

Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.

Autodoc CLUB app qr-code
Scan

To download the app:

Autodoc CLUB App icon